Installation Guide

Table Of Contents

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Assembly - Attaching the Fan Blades

Attaching the blades to the blade

brackets

Fastening the blade assemblies to

the motor

10 11

□ Attach a blade (F) to a blade bracket (G) by inserting screws

(AA) into the holes in the blade and through the blade

bracket. Note that the rubber washers are preattached to

the blade bracket.

□ Tighten each screw securely.

□ Repeat these steps for each blade (F) and blade bracket (G).

□ Fasten the blade assembly to the motor (D) by inserting the

alignment post into the slot on the bottom of the motor and

tightening the blade bracket (G) screws. The blade bracket

screws are pre-installed into the blade bracket (G).

□ Repeat this step for the remaining blade assemblies.