Use and Care Guide

Assembly - Attaching the Light

Attaching the light kit tter assembly

□ Connect the wires from the light kit tter assembly (G) to

the wires from the fan motor assembly (E) by connecting the

molded adaptor plugs together. Carefully tuck all wires and

splices into the switch cup.

□ Push the light kit assembly (G) up to the decorative cage (H)

and align the holes on the light kit tter assembly (G) with the

holes on the decorative cage (H).

□ Secure the light kit tter assembly (G) by using the screws

provided (EE).

□ Make sure all the screws are rmly tightened.

□ With power off, install the light bulb (I) by screwing it into the

bulb socket.

CAUTION: To reduce the risk of electric shock, disconnect

the electrical supply circuit to the fan before installing the

light xture.

Installing the decorative cage

□ Push the decorative cage (H) up to the black bracket and align

the three holes on the decorative cage (H) and the holes on the

black bracket.

□ Install the screws (DD) to secure the decorative cage (H)

properly.

□ Make sure all the screws are rmly tightened.