Item Model #1000-000-000 #53701101 USE AND CARE GUIDE LED UNIVERSAL CEILING FAN LIGHT KIT Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. – 6 p.m., EST, Monday - Friday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED Universal Ceiling Fan Light Kit. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Content ......................................... 2 Safety Information...................................... 2 Warranty ..................................................... 2 Pre-Installation........................................... 3 Planning Installation............................. 3 Tools Required ..................................... 3 Hardware Included............................... 3 Package Contents ................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. This fixture can be installed two ways: 1) Onto an outlet box. 2) Ceiling fan mount installation.
Pre-Installation (continued) PACKAGE CONTENTS A B C Color Temp Slide Switch (Select a warm or cool light simply by moving the switch to the proper position.
Installation Option #1 - Center Mounted Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. 1 Turn off power 3 Preparing the Ceiling Fan ■ 2 Preparing the Light Kit Adapter ■ Detach the screw nut, 2 washers from the adapter using wrench.
Option #1 - Center Mounted (continued) 5 6 Connecting the Wires ■ • Connect the connector from porceilain socket to the connector from ceiling fan mounting box. (If needed, use the wire nuts to make the connection.) Positioning the Pull Chain Guide Rod ■ Re-install the switch housing cover to the ceiling fan using the screws used to remove it.
Installation Option #2 - 2 Screw Switch Housing Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. 1 Turn off power 3 Preparing the Ceiling Fan ■ 2 Detach the switch housing cover of the switch housing of ceiling fan using tools necessary.
Option #2 - 2 Screw Switch Housing (continued) 5 Positioning the Pull Chain Guide Rod ■ 6 Put the pull chain guide rod (BB) to the ceiling fan pull chain drop down position, and place the plastic loop (DD) over the pull chain guide rod (BB), using PB 2.9 X 5 screws (FF) to fix the plastic loop (DD) on the back of lamp base. Choosing the Color Temp ■ FF Select the color temp desired by sliding the black slide switch on top of the fixture base. Select a warm light (2700K) or a cool light (3500K).
Installation Option #3 - No Wiring Required 1 Remove the Glass from the Light Kit Fitter ■ 2 Remove existing glass globe and incandescent light bulb. Installing the Light Kit ■ Screw the threaded base (A) into the E26 socket of ceiling fan tightly. A 9 HOMEDEPOT.COM Please contact 1-877-527-0313 for further assistance.
Care and Cleaning CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. Clean the fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem Possible Cause Solution The power is off. Ensure the power supply is on. The circuit breaker is off. Ensure the circuit breaker is in the on position. The fixture will not light.
