Installation Guide

PLANNING INSTALLATION
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Keep your receipt and these
instructions for proof of purchase.
NOTE: Hardware not shown to
actual size.
Wire
Strippers
Safety
Goggles
Flathead
Screwdriver
Phillips
Screwdriver
Electrical
Tape
Wire
Cutters
Ladder
Gloves
AA BB
Part Description Quantity
AA Wirenut (in parts bag) 3
BB Mounting Screw (1-1/2 in.) 2
3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
The fixture may not be compatible with all dimmers. If you are unfamiliar with electrical installations, we
recommend you have a qualified electrician do your installation.
Remove the existing fixture. Make yourself a sketch of how the current fixture is wired (by wire color) or mark the
wires with masking tape and a pencil so you will know how to reconnect the wires to your new LED fixture.
This fixture does not use a mounting bracket to secure it to the electrical box. Instead, it is secured to the box by
the included screws specifically designed to ground the pan to a metal electrical box. For safe operation, use only
the 1-1/2 in. electrical box screws included in the hardware kit. Screw them into the electrical box until there is
about 3/8 in. between the ceiling and the underside of the screw head.
PRODUCT DESCRIPTION AND CHARACTERISTICS
LED ceiling light can be directly mounted to the household ceiling and requires little space. It is energy-saving,
environmentally friendly, and used for emitting soft and even distribution of light.
Pre-Installation
WARNING: Shut off power at the circuit breaker or fuse
panel before removing the old fixture.