Instructions / Assembly

5 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Toggle Bolt Wings

Mounting to Drywall (continued)

Preparing to mount to a drywall mounting surface

□ Loosen the electrical box screws (AA) and turn the mounting bracket (B)

until the heads of the electrical box screws (AA) are in the large ends of the

keyholes, to take down the mounting bracket (B).

□ Drill four 5/8 in. holes at the locations marked on the mounting surface,

making sure the holes are large enough for the closed wings of the

toggle bolt (EE) to pass through.

□ Remove the wings from each toggle bolt (EE).

□ Insert each toggle bolt (EE) through the mounting holes on the

mounting bracket (B) and then reattach the wings.

□ Connect the metal wiring ring (DD) to the mounting bracket (B) using

the wiring ring screw (CC).

NOTE: The safety cable(s) attached to the mounting bracket (B) should

face away from the mounting surface.

Attaching the mounting bracket to the electrical outlet box and mounting surface

□ With help from another person, hold the mounting

bracket (B) up to the ceiling and feed the electrical

connection wires from the electrical outlet box through

the metal ring (DD) and center opening in the mounting

bracket (B).

□ With the electrical box screws (AA) extended to their

full length, place the large end of the keyholes on the

mounting bracket (B) over the electrical box screws (AA).

□ Turn the mounting bracket (B) so the heads of the

electrical box screws (AA) slide into the narrow portion of

the keyholes.

□ When the position of the toggle bolts (EE) coincides with

the location of the holes drilled in the ceiling, squeeze the

wings on each toggle bolt (EE) into the closed position and

insert them one by one into the holes drilled in the drywall

mounting surface.

□ Tighten the toggle bolts (EE) until the mounting

bracket (B) is ﬂush to the ceiling.

□ Tighten the electrical box screws (AA) to ﬁnish securing

the mounting bracket (B) to the mounting surface.

Mounting Holes

Keyholes