Item # 1000-236-530 1000-236-597 1000-236-705 1000-236-729 1000-236-762 Model # 54643141 54074242 54620141 54075242 54618142 USE AND CARE GUIDE LED ROUND 11 IN., 12 IN., 15 IN., 16 IN. AND 20 IN. Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this LED light.
Table of Contents Table of Content ......................................... 2 Safety Information...................................... 2 Warranty ..................................................... 2 Pre-Installation........................................... 3 Planning Installation............................. 3 Tools Required ..................................... 3 Hardware Included............................... 3 Package Contents ................................ 4 Installation ......................
Pre-Installation PLANNING INSTALLATION WARNING: Shut off power at the circuit breaker or fuse panel before removing the old fixture. The fixture may not be compatible with all dimmers. If you are unfamiliar with electrical installations, we recommend you have a qualified electrician do your installation. Remove the existing fixture.
Pre-Installation (continued) PACKAGE CONTENTS A B Part A B Description Flushmount Housing Flushmount Diffuser Quantity 1 1 4
Installation Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. 1 2 Removing the difusser ■ Turn the diffuser (B) counterclockwise to remove it from the housing plate. Installing the mounting screws Install the mounting screws (BB) in the junction box.
Installation (continued) 5 Mounting the difusser to the housing plate ■ ■ Position the diffuser (B) so that it becomes seated in the housing plate (A). Turn the diffuser (B) clockwise to secure it. Restore power to the electrical box. Turn the light switch on to activate the fixture.
Troubleshooting Minor problems often can be fixed without the help of an electrician. WARNING: Before doing any work on the fixture, shut off power supply at the circuit panel to avoid electrical shock. Problem The fixture does not light. The fuse blows or circuit breaker trips when the light is turned on. Possible Cause The power is off. There is a bad wire connection. The switch is defective. The wires are crossed or the power wire is grounded out. Corrective Action Check if power supply is on.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo # 1000-236-530 1000-236-597 1000-236-705 1000-236-729 1000-236-762 Modelo # 54643141 54074242 54620141 54075242 54618142 GUÍA DE USO Y CUIDADO PLAFÓN REDONDO CON LUZ LED 11 PULG., 12 PULG., 15 PULG., 16 PULG. Y 20 PULG. Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Hampton Bay en el horario de 8 a.m. – 6 p.m., Hora del Este de EE.UU., de lunes a viernes. 1-855-HD-HAMPTON HAMPTONBAY.
Contenido Contenido.................................................... 2 Informacíon sobre seguridad..................... 2 Garantía ...................................................... 2 Antes de la instalacíon............................... 3 Planificacíon de la instalacíon ............. 3 Herramientas necesarias ..................... 3 Materiales incluidos............................. 3 Contenido del paquete ......................... 4 Instalacíon ..................................................
Antes de la instalacíon PLANIFICACÍON DE LA INSTALACÍON ADVERTENCIA: Desconecte el suministro eléctrico en el panel de circuitos o de fusibles antes de sacar el aparato antiguo. El aparato puede no ser compatible con todos los atenuadores. Si no está familiarizado con las instalaciones eléctricas, le recomendamos que haga que un electricista calificado se ocupe de la instalación. Retire el aparato que está instalado.
Antes de la instalacíon (continuacíon) CONTENIDO DEL PAQUETE A B Pieza A B Descripción Caja del plafón Difusor del plafón Cantidad 1 1 12
Instalacíon Antes de comenzar el armado, la instalación o antes de operar el producto, asegúrese de que tiene todas las piezas. Compare las piezas con la lista del contenido en la página anterior. Si falta alguna pieza o si está dañada, no comience a armar, instalar ni operar el producto. Comuníquese con el servicio al cliente para el reemplazo de las piezas. 1 2 Extracción del difusor ■ Gire el difusor (B) en el sentido contrario a las agujas del reloj para extraerlo de la placa de la caja.
Instalacíon (continuacíon) 5 Montaje del difusor a la placa de la caja ■ ■ Coloque el difusor (B) de forma que quede apoyado en la placa de la caja (A). Gire el difusor (B) en el sentido de las agujas del reloj para asegurarlo. Conecte el suministro eléctrico de la caja eléctrica. Encienda el interruptor de la luz para activar el aparato.
Guía de solución de problemas Los problemas menores pueden arreglarse sin ayuda de un electricista. ADVERTENCIA: Antes de realizar algún trabajo en el aparato, desconecte el suministro eléctrico en el panel de circuitos para evitar descargas eléctricas. Problema Causa posible El suministro eléctrico está cortado. El aparato no enciende. Se quema el fusible o salta el disyuntor cuando se enciende la luz. Mal conexión de cables. El Interruptor es defectuoso.
Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Hampton Bay en el horario de 8 a.m. – 6 p.m., Hora del Este de EE.UU., de lunes a viernes. 1-855-HD-HAMPTON HAMPTONBAY.COM Conserve este manual para uso futuro.