Installation Guide

4
1
Separating the diffuser shade
from the fixture plate
□ Open the two latches on the fixture plate (A).
□ Remove the diffuser shade (B).
2
Installing the mounting screws to
the electrical box
□ Screw the mounting screws (BB) directly to the
electrical box.
Installation
WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the
circuit breaker before removing the existing light fixture or installing the new one.
With power disconnected to the electrical box, remove the existing fixture. Make a sketch of how the current fixture is wired (by wire color)
or mark the wires with masking tape and a pencil so you will know how to properly reconnect the wires to the new LED light fixture.
A
B
BB
BB
A