Instructions / Assembly

Assembly(Corner)
1
Attaching the back
2
Attaching the seat
3
Attaching the side skirt
4
11
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
Place the right back (M) and the left back (N) on a soft
surface.
Attach the right back (M) to the left back(N) .
ighten half way
using the Hex wrench (DD).
Fasten
the inside hole with bolt (BB) and washer (CC) .Then
fasten outside hole with (BB) and (CC) .T
Attach the seat (L) to the backs by aligning three holes
on the seat (L) to the two holes on the right back (M) and
one hole on the left back (N) and inserting bolts (BB) with
washers (CC) and tighten half way using the Hex wrench
Place the chair right side up.
Check and make adjustments as needed.
Fully tighten all the bolts (AA) with the Hex wrench (DD)
Place the seat cushion (P) and back cushions (O) on the
chair .
This chair is now ready for your enjoyment.
L
N
L
N
BB
CC
BB
CC
BB
CC
BB
CC
(DD). Do not tighten completely.
D
M
O
P
O
□
□ □
Attach the left side skirt (J) to the seat (M) by
aligning
holes on the seat (M) with the holes on the side skirt (J)
and inserting bolts (AA) with washers (BB). Tighten half
way using the Hex wrench (DD). Do not tighten
completely.
Attach the side skirt (D) to the seat (L) by aligning
holes on the seat (L) with the holes on the side skirt (D)
and inserting bolts (BB) with washers (CC). Tighten
half way using the Hex wrench (DD). Do not tighten
completely.
□
□
□
□
□
L
M
N
D
BB
CC
N
M
□ □
M
Completing the assembly
□