Instructions / Assembly

5
Assembly
1
Attaching the legs to the shelf
2
Attaching the legs to the top
□ Place the shelf (C) on a soft surface.
□ Insert the built-in bolts on the legs (B) into the holes
on the shelf (C). The legs and shelf must be
attached as this image shows. Fasten with washers
(BB) and locking nuts (AA) and hand-tighten.
□ Place the top (A) on a soft surface.
□ Insert the built-in bolts on the top (A) into the holes on the
legs (B). Fasten with washers (BB) and locking nuts (AA)
3
Adding the caps
4
□ Check and make adjustments as needed.
□ Fully tighten all the locking nuts (AA) with the
wrench (DD) and cover with the nut caps (CC).
□ Adjust leg levelers as required.
□ Place the table right side up.
and tighten half way using the wrench (DD). Do not
tighten completely.
Completing the assembly
□ This table is now ready for your enjoyment.
Please contact 855-HD- HAMPTON for further assistance.
HAMPTONBAY.COM
1-
B
B
C
AA
BB
AA
BB
B
B
C
A
BB
BB
AA
AA
CC
CC
CC
CC