Full Product Manual

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Attaching the Light Kit

Installing the bulbs and attaching the

glass bowl

□ Remove the compressing ring (MM) from the threaded

socket of the light kit (G) by turning the compressing ring

(MM) counterclockwise until it unlocks.

□ Insert the glass shade (H) into the light kit cowling and turn

the compressing ring (MM) clockwise to tighten and secure

the glass shade. Repeat for the remaining shades.

□ With power off, screw the LED bulbs (K) into the sockets.

□ Attach the pull chain extensions (BB) to the light pull chain

and fan pull chain.

CAUTION: Make sure the power is off before attaching or

removing the glass bowl.

WARNING: Allow the glass bowl to cool completely before

removing.

CAUTION: Over lamping the fan will result in the fan lights

shutting down until the proper wattage bulbs are installed.

Reset the lights by turning off the power, replacing the bulbs

with the correct wattage bulbs, and turn the power on.