Full Product Manual

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Standard Ceiling Mount

Routing the wires

Assembling the fan

Preparing for mounting

□ Remove the canopy ring (D) from the canopy (C) by

turning the ring counter-clockwise until it unlocks.

□ Remove the mounting bracket (A) from the canopy (C)

by loosening the two canopy screws (FF) located in the

“L shaped” slots.

□ Remove and save the two canopy screws (FF) and lock

washers (GG) in the round holes. This will enable you to

remove the mounting bracket (A).

□ Route the wires exiting the top of the fan motor (F),

through the coupler cover (E), and canopy ring (D).

□ Make sure the slot openings are on top and route the

wires through the canopy (C) and then through the

ball/downrod assembly (B).

□ Remove the setscrew (RR) by turning it counterclockwise.

□ Install the downrod (B) by inserting it into the motor collar

(TT), and turning it clockwise until it is tight.

□ Reinstall the setscrew (RR) turning clockwise until tight.

CAUTION: To ensure wobble-free operation and to

avoid damage to the fan, the downrod (B) and the

setscrew (RR) must be completely tightened