Installation Guide

Installing the canopy

11 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

□ Tuck the connections neatly into the ceiling outlet

box.

□ Slide the canopy (B) up to the mounting bracket (A)

and place the key hole on the canopy (B) over the

loose canopy mounting screw (EE) on the mounting

bracket (A). Turn the canopy (B) clockwise until the

canopy (B) locks in place at the narrow section of the

key holes.

□ Align the circular hole on the canopy (B) with the

remaining hole on the mounting bracket (A). Secure

the canopy mounting screw (EE) previously removed

in the hole and tighten the two canopy mounting

screws (EE).

WARNING: Make sure the tab on the mounting bracket (A)

properly sits in the groove in the hanger ball (D) before

attaching the canopy (B) to the mounting bracket (A) by

turning the canopy housing until it drops into place.

NOTE: Adjust the canopy mounting screws (EE) as

necessary until the canopy (B) and canopy bottom cover (C)

are snug.

□ Attach the canopy bottom cover (C) to the canopy

mounting screw (EE) heads on the bottom of the

canopy (B) by inserting the screw heads into the key

slots in the canopy bottom cover (C) and rotating the

canopy bottom cover (C) clockwise.

Attaching the canopy

bottom cover

Assembly — Hanging the Fan (continued)