Installation Guide

□ Mount the glass shades (I) to the light sockets by

unscrewing partway the three light holder

thumbscrews (CC) on each glass holder. Insert the

glass shades (I), then gently tighten the thumbscrews

(CC) by hand evenly to the glass shades (I). Do not

overtighten.

□ Install three 9.5 Watt LED bulbs (LL) (included).

Attaching the light kit to

the switch housing

Mounting the glass shades and

installing the light bulbs

13 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

CAUTION: Before starting installation, disconnect the

power by turning off the circuit breaker or removing the fuse

at the fuse box. Turning power off using the fan switch is not

sufﬁcient to prevent electric shock.

□ While holding the light kit (H) under your fan motor

assembly (E), locate two single white and blue wires

in the switch housing labeled "FOR LIGHT". Make the

polarized plug connections:

- White to white

- Blue to black

□ Carefully push all wires back into the switch housing.

Install the light kit (H) onto the switch housing with

the three light kit mounting screws (JJ) provided. Be

sure to tighten all screws.

Assembly — Installing the Light Kit