Model #5LGZ1161 USE AND CARE GUIDE Callaway 12 ft.x10 ft. Roof Style Domed Garden House Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8.00 a.m. - 6.00 p.m., EST, Monday - Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU garden house. to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents........................................................2 Safety Information.......................................................2 Warranty ...................................................................... 2 One Year Frame and Fabric Limited Warranty............................ 2 What Is Covered .... .. ................................................................ 2 What Is Not Covered ..................................................................
Pre-Assembly PLANNING ASSEMBLY It will take two people about 30 minutes to complete the assembly process. TOOLS REQUIRED (not included) Please have a ladder ready before assembly. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS J A K B K1 C L D M E F N F1 O G P G1 H Q I Part Description Quantity Part Description Quantity A Post 4 Left short beam Right short beam Left long beam 2 2 2 I J Long corner roof tube B C Short corner roof tube 4 K K1 Long middle roof tube Short middle roof tube E F Right long beam 2 L Post base 2 2 4 Short netting rail 2 Foot 4 F1 Short netting rail 2 M N Roof hub 1 G Long netting rail 2 Vent cover 1 G1 H Long nett
Assembly 1 Attaching the post bases and the feet □ Slide the bottom of one post (A) into one foot (M). □ Attach one post base (L) to the bottom of each post (A) with bolts (AA) and bolt caps (DD) using wrench (KK). Drop the foot (M) to cover the post base (L). □ Attach one bracket (II) to the top of each post (A) with bolt (AA) and bolt cap (DD) using the wrench (KK). □ Repeat this for the remaining posts (A). DD KK AA II II A A A M L M DD KK AA L 5 HAMPTONBAY.
Assembly (continued) 2 Assembling the cross beams □ Snap one short left beam (B) into one short right beam (C) and secure them with bolts (CC), nuts (EE) and bolt caps (DD) using the wrench (KK) and the spanner (LL). □ Repeat this for the remaining short beams (B and C). □ Follow these same procedures for the long beams (D and E).
Assembly (continued) 3 □ □ Attaching the netting rails Attach one netting rail (F) to each cross beam (B), and one netting rail (F1) to each cross beam (C) with eight bolts (BB), eight bolt caps (DD) and eight nuts (EE) using the wrench (KK) and the spanner (LL). (See illustration below) Attach one netting rail (G) to each cross beam (D), and one netting rail (G1) to each cross beam (E) with eight bolts (BB), eight bolt caps (DD) and eight nuts (EE) using the wrench (KK) and the spanner (LL).
Assembly (continued) □ □ □ □ □ □ 4 Setting up the main frame Please have a free standing ladder ready for ease of assembly. Use four bolts (AA) to attach the C side of the assembled short beams to the outside right corner post (A) and use four bolts (AA) to attach the B side of the assembled short beams to the outside left corner post (A).
Assembly (continued) 5 Assembling and attaching the roof frame □ Snap one short corner roof tube (J) into each long corner roof tube (I) . Snap four corner roof tubes (I) into the receivers I of the vent hub (N). Snap two middle roof tubes (K) into the receivers K of the vent hub (N). Snap two middle roof tubes (K1) into the receivers K1 of the vent hub (N). □ With a person on the ladder inside the main frame, place the roof frame onto the main frame.
Assembly (continued) 6 Attaching the main canopy and the vent cover □ □ Identify the long side and the short side of the main canopy (P), cover the roof frame with the main canopy (P). Fully extend each corner of the main canopy (P) to cover the four corners of the main frame. □ Cover the completed cross beams with the valance of the main canopy from outside of the frame for a clean look. □ From inside of the main frame place the vent cover (O) over the roof frame.
Assembly (continued) 8 Anchoring the garden house □ Adjust the location of each post until all the posts are standing upright on level ground. Hammer two ground stakes (FF) through the holes on each post base (A) into the soft ground. □ Measure out from post to the longest possible distance to best use the length of the guy rope (GG) and secure anchors (HH) to ground at 45 degrees. M FF GG HH L 。 45 11 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8.00 a.m. – 6.00 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
