Instructions / Assembly

6
Attaching the main canopy and the vent cover
□ Identify the long side and the short side of the main canopy (P), cover the roof frame with the main canopy (P).
□ Fully extend each corner of the main canopy (P) to cover the four corners of the main frame.
Assembly (continued)
10
□ Cover the completed cross beams with the valance of the main canopy from outside of the frame for a clean look.
□
From inside of the main frame place the vent cover (O) over the roof frame. Fully extend each corner of the vent cover (O) and
insert the end of each corner roof tube (I) into each pocket. Secure the vent cover (O) to the main canopy (P) with hook and loop
strips.
P
O
7
Hanging the netting panels
□
Find the short side and long side of each netting panel (Q).
Attach the long and short sides of each netting panel to the plastic clips (JJ) from the inside corners of the main frame.
Secure each netting panel (Q) to the posts (A) using the small tie back on the outside of each netting panel.
You can pull each netting panel back to the corner post and secure the panels to the corner pasts with the large tie back
that is located on the inside of each of the netting panels.
□
□
□
Q
JJ
A