Instructions / Assembly

Assembly (continued)
8
4
Setting up the main frame
H
JJ
H
DD
DD
H
H
H
B
C
D
E
DD
B
E
E
A
x6
AA
C
D
JJ
B
G
x5
JJ
F1
□ Please have a free standing ladder ready for ease of assembly.
□ Use four bolts (AA) to attach the C side of the assembled short beams to the outside right corner post (A) and use four bolts (AA) to attach
the B side of the assembled short beams to the outside left corner post (A). (See illustration below)
□ Use four bolts (AA) to attach the E side of the assembled long beams to the outside right corner post (A) and use four bolts (AA) to attach
the D side of the assembled long beams to the outside left corner post (A). (See illustration below)
□
Repeat the above procedures until the main frame is up. Fully tighten all the bolts (AA) once the frame is up. Cover all the bolts (AA) with
bolt caps (DD).
□ Slide 5 clips (JJ) into each short netting rail (G), slide 5 clips (JJ) into each short netting rail (G1), slide 6 clips (JJ) into each long netting rail (F),
slide 6 clips (JJ) into each short netting rail (F1), slide 2 clips (JJ) into each corner netting rail (H).
Attach one corner netting rail (H) to each inside corner of the frame with bolts (AA) and bolt caps (DD) using the wrench (KK) .
AA
□