Instructions / Assembly

K(1)

I (2)

Assembly

Assembling the roof frame (2)

□

Attach the central beam (K) onto the top of the complete side beams (F_G, and F1_G1) with bolts (AA) using hex wrench (FF).

Attach the short side beams (I) onto the the complete side beams (F_G, and F1_G1) with bolts (AA) using hex wrench (FF).

□

12/10

Inserting poles into the canopy

□

Insert poles (L) and (M) into the canopy (P) from each end. Do not Join the two parts into one until step 8.

Insert poles (N) and (O) into the center of the canopy (P). Do not join the two poles before setting the canopy fabric on the frame.

□

Bolt (M6x16)

AA (12)

IMPORTANT:

Please put the ring (1) which is inside the rail of

the beam (K) on the (F1_G1) side where

the pole receivers (Q) are installed.

GG (12)