Specification

5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installing the light kit for fans
without pull chains
Installing the light bulbs and
shatter resistant shades for fans
with pull chains
□ Place the shatter resistant shade (B) into the light kit
assembly (A), aligning the three at areas on the top ange
of the shatter resistant shade (B) with the three raised
dimples in the light kit assembly (A). Turn the shatter
resistant shade (B) clockwise until it stops.
□ With the power off, install the four LED bulbs (C) (Max.9.5W.
included) into the light socket.
□ Place the shatter resistant shade (B) into the light kit
assembly (A), aligning the three at areas on the top ange
of the shatter resistant shade (B) with the three raised
dimples in the light kit assembly (A). Turn the shatter
resistant shade (B) clockwise until it stops.
□ With the power off, install the four LED bulbs (C) (Max.9.5W.
included) into the light socket.
□ Attach the pull chain extensions (AA) to the fan switch and
light switch pull chains.
5
4
E
B
A
C
AA
Installation (continued)
C
B
A
D
DD
EE
BB
E
WARNING: Over lamping the fan will result in the
fan lights shutting down until the proper wattage of
bulbs are installed. Reset the lights by turning off,
replace the bulbs with the correct wattage bulbs,
and turn on.
WARNING: Over lamping the fan will result in the
fan lights shutting down until the proper wattage of
bulbs are installed. Reset the lights by turning off,
replace the bulbs with the correct wattage bulbs,
and turn on.