Instructions / Assembly

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Attaching the runner to the leg
2
Attaching the other leg
3
Completing the assembly
□
□
□
□
BACK
FRONT
C
X1
A
B
FRONT
BACK
BB
B
B
A
FRONT
BACK
AA
□
□
□
□
AA
BB
Place the chair (A) upside down on a soft surface.
Use the bolt(AA) to x the runner of the front hole to the front
leg as below photo shown. Tighten half way using the Hex
wrench (CC).
Use the bolt(BB) to x the runner of back hole to the back leg
as be low photo shown. Tighten half way using the Hex
wrench (DD).
Check and make adjustments as needed.
Fully tighten all the bolts (AA) with Hex wrench(CC) and
bolts (BB) with Hex wrench(DD).
Place the chair right side up.Place the cushion(C) on the chair.
This chair is now ready for your enjoyment.
Repeat step 1 for the other leg.