Instructions / Assembly

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1 2
Attaching the bases
□
□
Place the top (A) face down on a soft surface.
Attach the large base (B) and small base (C) to the top (A) by
aligning holes on the large base (B) and small base (C) with the
holes on the top (A). Secure alternating sides on legs when lining
up holes.Insert bolts (AA) with washers (CC) .
Attaching the bases to the top
3
4
Completing the assembly
□
□
Adding the caps
Place the table right side up.
This table is now ready for your enjoyment
□
□
Check and make adjustments as needed.
Fully tighten all the bolts (AA) and bolts (BB) with the Hex
wrench (EE) and cover with the bolt caps (DD).
B
C
A
□
Place the large base (B) face down on a soft surface.
Attach the small base (C) to the large base (B) by aligning
holes on the small base (C) with the holes on the large
base(B). The bases must be attached as this image shown.
Inser bolts (BB) with washers (CC) and hand tighten.
Do not tighten completely.
□
C
B
BB
CC
AA
CC
B
C
A
DD
DD