User Guide

Installation

Installing the mounting bracket

Make sure the power is off.

Pull the supply wires out of the outlet box.

Unscrew the decorative nut (DD) from the canopy (A) and

detach the mounting bracket (AA).

Fasten the mounting bracket (AA) to the outlet box

Making the electrical connections

negative wire from the outlet box, the positive wires (white)

Secure all connections together with the wire connectors

and connect the bare copper from the ﬁxture around the

green screw on the mounting bracket, then connect it to the

grounding conductor of the supply circuit together.

(CC) and wrap electrical tape (not included) around the wire

connectors (CC).

Push all excess wire and wire connections back into the

outlet box.

White

Black

Ground

Installing the canopy

Align the mounting hole on the canopy (A) with the

threaded stem on the mounting bracket (AA).

Secure the canopy (A) to the threaded stem on the

mounting bracket (AA) using the decorative nut (DD).

Installing the shade and light bulb

Secure the shade (B) to the socket on the canopy (A) using

the socket ring (C).

Install a medium base, 60 Watt maximum each, light bulb

(not provided) into each socket.