Item #1001 362 427 Model #68164 USE AND CARE GUIDE PATIO HEATER Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM C US THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this patio heater. We strive to continually create quality products designed to enhance your home.
Table of Contents Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Replacing the Gas Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Maintenance. . . . . .
Safety Information (continued) PROPANE GAS PRECAUTIONS WARNING: California Proposition 65 Combustion by products produced when using this product contain chemicals known to the state of California to cause cancer, birth defects, and other reproductive harm. DANGER: EXPLOSION – FIRE HAZARD □□ Never store propane near high heat, open flames, pilot lights, direct sunlight, other ignition sources, or where temperatures exceed 120°F (48°C).
Safety Information (continued) □□ If the hands or wrists have been burned, remove jewelry if possible without causing further injury. This prevents the necessity of having to cut off jewelry since swelling usually occurs as the result of a burn. □□ Do not pop any blisters. Cover the burn with a light gauze dressing. □□ If blisters pop, apply a light antibiotic ointment and dress the wound area with gauze as previously described.
Pre-Assembly PLANNING ASSEMBLY Carefully lay all parts out on a soft surface and compare all parts to the Package Contents list. If any part appears missing or damaged, do not use this product and call customer service immediately.
Pre-Assembly (continued) PACKAGE CONTENTS A B C D E F G I H Part Description Quantity A Reflector 1 B Head assembly 1 C Post 1 D Tank housing 1 E Post support 1 F Support legs 3 G Regulator 1 H Base 1 I Wheel assembly 1 6
Assembly 1 2 Attaching the wheel assembly to the base If your model did not come with a wheel assembly, proceed to step 2. If your model does not come with the anchoring arms and nuts or you do not wish to attach these items, proceed to step 3. □ Align the holes in the wheel assembly (I) with the holes in the base (H). □ Mount the anchoring arms (II) to the holes on the base housing (H) using six bolts (AA) and nuts (BB).
Assembly (continued) 5 6 Placing the tank housing □□ Place the tank housing (D) on top of the assembly. Attaching the reflector studs to the head assembly □□ Insert three reflector studs (FF) into the top of the head assembly (B). Tighten the studs securely. FF D B 7 Attaching the head assembly □□ Remove the 4 pre-assembled screws from the head assembly (B) and attach the post (C) with these 4 screws.
Assembly (continued) 8 Assembling the reflector A KK LL WARNING: Remove the protective cover before assembly. NOTE: Leave all screws and nuts loose until the entire reflector is put together in order to ensure proper alignment of all sections. □□ Slide two pieces of the reflector (A) together. Insert one small screw (LL). Repeat until all pieces of the reflector are connected. □□ Place cap nuts (KK) on the screws (LL).
Connecting the Propane Tank (continued) CONNECTING THE TANK 1. Attach a regulator to the cylinder. 2. Install the cylinder to the heater assembly using the webbing (MM). MM Performing a Leak Test WARNING: Perform all leak tests outdoors. Extinguish all open flames. NEVER perform this test while smoking. DO not use the heater until all connections have been tested and confirmed not to be leaking. 1. Make a 2-3 oz. solution consisting of one part dishwashing detergent and three parts water. 2.
Operation DANGER: For outdoor use only. Never use inside a house, or other unventilated or enclosed area. This heater consumes air (oxygen). Do not use in an unventilated or enclosed area as this will endanger your life. DANGER: EXPLOSION – FIRE HAZARD □□ Never store propane near high heat, open flames, pilot lights, direct sunlight, other ignition sources, or where temperatures exceed 120°F (48°C). □□ Propane vapors are heavier than air and can accumulate in low places.
Operation (continued) BEFORE YOU TURN THE GAS SUPPLY ON □□ Your heater was designed and approved for outdoor use only. Do not use it inside a building, garage, or any other enclosed area. □□ Make sure the surrounding areas are free of combustible materials, gasoline, and other flammable vapors or liquid. □□ Ensure that there is no obstruction to the air ventilation. □□ Ensure all gas connections are tight and there are no leaks. □□ Ensure the cylinder cover is clear of debris.
Replacing the Gas Cylinder WARNING: Changing of the cylinder must be undertaken in a flame-free atmosphere. Ensure that all taps on the consuming appliance are in the closed position. 1. Close the valve of the gas cylinder. 2. Disconnect the regulator from the cylinder following the instructions that came with your regulator. 3. Replace the cylinder. 4. In the absence of any flame, remove the plug or seal cap from the cylinder valve. 5.
Care and Cleaning WARNING: Do not perform maintenance after the heater has been turned off until the temperature has cooled down. Do not expose the pilot, controllers and parts underneath the burner to water. Do not use the heater if any of these parts are exposed to water until the appliance is inspected or repaired by a qualified service person. □□ Wipe off powder coated surfaces with a soft, moist rag and soapy water. Do not clean the heater with cleaners that are combustible or corrosive.
Troubleshooting (continued) There is thick black smoke. There is blockage in the burner. Turn off the heater and let it cool. Remove the blockage and clean the inside and outside of the burner. The heater produces a whistling noise when the burner is lit. Air passageways are blocked. Check the minimum installation clearances and air passageways for debris. There is air in the gas line. Operate the burner until the air is completely purged.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.