Instructions / Assembly

15 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Troubleshooting (continued)
There is thick black smoke. There is blockage in the burner. Turn off the heater and let it cool. Remove the
blockage and clean the inside and outside of the
burner.
The heater produces a whistling noise
when the burner is lit.
Air passageways are blocked. Check the minimum installation clearances and
air passageways for debris.
There is air in the gas line. Operate the burner until the air is completely
purged.
The heater produces a clicking noise
just after the burner is lit or turned off.
The metal is expanding and contracting. This is common with heaters. If noise is ex-
cessive, contact a qualied service person.
There is a gas odor even when the
control knob is in the OFF position.
There is a gas leak. Locate and correct the leak immediately.
The gas control is defective. Replace the gas control.
There is a gas odor during combustion. There is foreign matter in the gas or on the
burner ports.
Check the gas passageway and burner.
The heater is burning vapors from paint or
impurities in the air.
Stop storing and using odor-causing products
near the heater.
There is gas leaking from the regulator and
hose connection, the valve and pipe connec-
tions, and the pipes.
Locate and correct the leaks, or contact your
gas supplier.
There is carbon build-up. There is dirt or lm on the reector and
ame screen.
Clean the reector and ame screen.