MSDS

Page: 3 of 6
Material Safety Data Sheet
Printing date September 30, 2011 Reviewed on September 30, 2011
Trade name: Ni-MH RECHARGEABLE BATTERY
EU
7 Handling and storage
Handling:
Information for safe handling:
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of dust.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility:
Store away from flammable substances.
Do not store together with oxidizing and acidic materials.
Further information about storage conditions:
Keep receptacle tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.
8 Exposure controls/personal protection
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the skin.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer
Exposure use respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
Degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further
marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of
several substances, the resistance of the glove material can not be calculated in advance and has
therefore to be checked prior to the application.
Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and