Instructions / Assembly

7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation - New Construction (continued)
4
Connect house and fan wires
Quick
connector
House
wires
Product
wires
 Pull the wire through the hole and into the junction box (not
included). Using a quick connector, secure 120 VAC house
wiring from the wall switch to the fan as shown in the wiring
diagram on page 3.
CAUTION: If the electrical wires do not match the colors listed,
you must determine what each house wire represents before
connecting. You may need to consult an electrical contractor to
determine safely.
 Push the wires back through the hole. Reattach the wiring box
cover.
5
Install the duct
4 in. duct
Ceiling
Duct tape
or clamp
 Install a circular 4 in. duct (not included) and secure it with
duct tape or clamps (neither included).
 Finish ceiling work. The ceiling hole should be aligned with
the edge of the fan housing.
6
Install the grille
 Pinch the mounting springs on the grille (B) and insert them into
the narrow rectangular slots inside the fan. Push the grille (B)
up toward the ceiling.
 Turn on electricity at the breaker box after nishing installation.
B