Instructions / Assembly

Installation (continued)

Connecting the wires

□ Strip 3/8 in. of insulation from the wire ends of the fixture.

□ Using wire nuts (BB), connect the RIBBED fixture wire to the

white (neutral) supply wire from the junction box. Then

connect the SMOOTH fixture wire to the black (live) supply

wire from the junction box.

□ Connect the ground wire from the junction box and the

ground wire from the fixture to the ground screw on the

mounting strap (CC). Tighten the ground screw to secure

both ground wires to the mounting strap (CC).

□ Wrap electrical tape (not included) around the wire nuts

(BB), and ensure they are secure. Then push all wire

connections into the outlet box.

Installing the fixture to the ceiling

Installing the bulbs

□ Place the fixture canopy (HH) over the chain holder (FF) and

nipple (AA) and secure it to the ceiling by tightening the

screw collar (EE).

□ Screw the bulbs

(

not included) into the fixture socket. This

fixture uses 100-watt MAX, incandescent, medium-base,

SBCFL or SBLED bulbs. Ensure that you do not exceed the

recommended wattage.

Ground screw

Ribbed

Smooth