Use and Care Manual

HIGH VELOCITY WALL MOUNT FAN
OPERATION INSTRUCTIONS
CAUTION:
Read and follow all instructions before operating fan. Do not use if any part is damaged or
missing.
WARNING:
To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed
control device. This appliance has a 3-prong plug. To reduce the risk of electrical shock,
this plug is intended to fit in an outlet only one way. If this does not fit the outlet, contact a
qualified electrician. Do not attempt to bypass this procedure.
RULES FOR SAFE OPERATION:
● Do not insert finger or any objects through the grill guard when fan is in operation.
● Disconnect fan when moving from one location to another.
● Disconnect the fan when removing guards for cleaning
● Do not use fan in window. Rain and moisture may create an electrical hazard.
● Make sure fan is on a stable, flat surface when in operation.
OPERATION INSTRUCTIONS
:
TO ADJUST AIRFLOW UPWORD OR DOWNWARD: Tilt the head of the fan to the
desired angle.
SPEED CONTROL: Pull gently on chain to change the setting on the speed control to the
desired setting–low, medium or high.
FOR PERMANENT FAN MOUNTING ONLY: Install fan onto solid vertical surface with
appropriate 3/8” hardware through the large mounting hole in bracket.
CLEANING
WARNING: Unplug from electrical supply source before cleaning. After servicing, any
safety device (including grills and blades) must be reinstalled or remounted as previously
installed.
Use soft damp cloth then wipe with dry cloth .Do not use harmful cleaners. Do not bend
the blades.
PRINTED IN CHINA
JDVW