Instructions / Assembly

8
Assembly (continued)
Insert Wood Dowels (CC) into pre drilled holes in Center
Front Pane (F)
Push Center Decorative Panel (H) snug to Left Front
Panel (D) and Right Front Panel (E).
Using Bolts (AA) and Washers (BB) attach panels
through pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
4
Center Decorative panel installation
H
nsert one Wood Dowel (CC) into each of the pre-drilled
holes on the top edges of the Assembly from step 3.
Then locate Mantel/Top (G) and lay nished side up
on top of completed assembly. From the inside, attach
Mantel/Top (G) using Bolts (AA) and Washers (BB)
through the pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Using Phillips head screwdriver tighten all Bolts
alternating top and bottom, left and right.
5
Installing the Top Panel
G
Loosen the preattached screw and remove the two
mounting brackets attached to the back of the Left
and Right Front panels.
6
Installing the inserts