Installation Guide

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

Wood shelf installation

Install

Insert

From

Back

Completed

Unit

Electric

Fireplace Insert

Lift insert carefully into the back of the unit and

center in the insert opening. Do not drag insert

across Hearth/Base (A) as it may scratch your unit.

Attach Securing Block (S) to hold insert from back.

Using the Bolts (AA) through pre-drilled holes.

Insert installation

Hardware Used

Part Description Qty

DD Shelf Pin 8

Part Description Qty

AA Bolt 1

Choose desired height of Shelf (H) and place the

four Shelf Pin (DD) into same height shelf holes

inside side panels.

Insert Wood Shelf (H), allow Wood Shelf (H) to rest

on the Shelf Pin (DD).

NOTE:

Please read all “electric replace insert”

instructions prior to installing electric insert in your completed

replace mantel. Install the insert in your replace close to its

nal position.

NOTE:

Use great care to move your completed unit. Move

it only short distances, and use two people to move it into its

nal position.