Instructions / Assembly

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

Attach the Left Side Panel (E) to the Center Shelf (D),

using Bolts (AA) through the holes in the Plastic

Connector (KK) and tighten.

Repeat for the Right Side Panel (F).

Attach the Middle Support Panel (N) on the top of the

assembly from the step 7 as shown in the diagram.

Insert Wood Dowels (CC) into the holes in the Center

Shelf (D).

Insert a Long Flathead Screw (BB) through the pre-drilled

hole and tighten, from the bottom of the Center Shelf (D).

Insert Wood Dowels (CC) into the holes in the

Hearth/Base (A).

Push the Base (A) snug to the completed assembly from

step 6 as shown in the diagram.

Use a Phillips head screwdriver to tighten the Long

Flathead Screws (BB) through the pre-drilled holes in

the Hearth/Base (A).

Installing the side panel

Installing the middle support panel

Installing the base

NOTE:

A stubby screwdriver (not

included) is reccomended for this step