™ Model 840 Four Wheel Hose Cart Owner’s Manual VISIT OUR WEBSITE: WWW.LIBERTYGARDENPRODUCTS.COM OR CALL US TOLL FREE AT 1-866-820-5805 LIBERTY GARDEN PRODUCTS, INC.
TOOLS REQUIRED: TWO ADJUSTABLE WRENCHES & HAND PUMP Estimated Assembly time: 30 minutes PARTS LIST A. SPOOL (1) A B C B. FRAME (1 UNIT) C. TIRES (4) D. U-HANDLE (1) D E E. LEADER HOSE (1) F. AXLE ROD (2) F Important! Some of your hose cart parts below will come factory assembled. G G. U-BUSHING (2) H. SPACER WASHER (2) I. SPRING (1) J. CRANK HANDLE (1) K. BRASS SWIVEL (1) L. GALVANIZED TEE (1) M. 1.75 BOLTS W/LOCK NUTS (4) N. 1.44 BOLTS W/WING NUTS (2) O. AXLE WASHERS (4) P. AXLE NUTS (4) Q.
F 1. Turn Frame (B) on it’s back. Insert Axle Rod (F) thru the axle bushing on the frame. Repeat. See Figure 1 B F 2. Place the tires (C) over the axle with the air valve facing out. Place the axle washer (M) over the thread and screw on the axle nut (N) and tighten securely. Repeat for each remaining tire. See Figures 2 & 3 FIGURE 1 FIGURE 3 M C N FIGURE 2 3. Set the cart upright on the tires. K 4.
6. Turn Spool (A) around and slide a plastic spacer washer (H),spring (I) and another plastic spacer washer (H) over the pipe. Take a U-bushing (G) and two of the 1.75 Bolts (M) Attach using the lock nuts. Thread the crank handle onto the end of the pipe. See Figure 6 & 7. FIGURE 7 FIGURE 6 G H H A A M I FIGURE 8 Q 7. Attach rubber handle (Q) to crank handle using handle bolt.Tighten securely. See Figure 8 Tighten securely FIGURE 9 G M M 8. Turn the spool around.
6. Turn Spool (A) around and slide a plastic spacer washer (H),spring (I) and another plastic spacer washer (H) over the pipe. Take a U-bushing (G) and two of the 1.75 Bolts (M) Attach using the lock nuts. Thread the crank handle onto the end of the pipe. See Figure 6 & 7. FIGURE 7 FIGURE 6 G H H A A M I FIGURE 8 Q 7. Attach rubber handle (Q) to crank handle using handle bolt.Tighten securely. See Figure 8 Tighten securely FIGURE 9 G M M 8. Turn the spool around.
CARE INSTRUCTIONS Rust Your hose reel will give you many seasons of reliable and functional hose storage. As with any steel product, there is always the chance for rust developing over time. Your hose reel finish is designed for industrial applications, but even the toughest of coatings can be compromised by scratches. Such minor surface damage can occur in shipping despite our best efforts. We have found that most scratches occur during assembly and/or installation.
CURING A LEAKING SWIVEL Problem: Your new Liberty™ model 840 hose cart is leaking at the swivel. Solution: It is normal for the swivel to leak slightly until the O-rings are wet and have seated. If the leaking continues, you don’t need to take the cart back to the store. This is a simple problem and is easily fixed by a simple procedure. 1. If the leader hose is attached to the swivel, unscrew the hose and look inside the swivel. 2.
LIBERTY GARDEN PRODUCTS LIMITED WARRANTY (Effective January 15, 2018) This limited warranty is applicable to each original end-customer (hereinafter “Customer”) purchasing the model 840 four wheel hose reel cart consisting of the structural metal frame and spool (hereinafter the “Structural Frame”) and various other non-frame components (hereinafter the “Non-Frame Parts”) sold by Liberty Garden Products, Inc. (hereinafter “Company”) for Customer’s own use and not for resale.
LIBERTY GARDEN PRODUCTS LIMITED WARRANTY CONTINUED 2.
