Installation Guide

ManualsBrandsHampton Bay ManualsLandscape LightingSolar Powered Integrated LED Black Landscape Path Light (6-Pack)

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

D E F

PACKAGE CONTENTS

PLANNING FOR A SUCCESSFUL ASSEMBLY

Read all instructions before assembly and installation.

Inspect each part for defects that may have occurred during shipping.

Keep your receipt and these instructions for proof of purchase.

CHOOSING THE RIGHT LOCATION

Install your solar light in a location with full, direct sunlight. Do not install in shad-

ed areas as these areas will not allow the batteries to fully charge and will reduce

the nighttime operating hours for your light. Ensure that the installation location

is away from other nighttime light sources such as street or porch lamps. These

light sources may prevent your solar light from automatically turning on.

Part Description Quantity

A Top Cover 6

B 450 mAh LiFePO4, 14430 rechargable

battery (pre-installed)

C Battery Cover 6

D Housing 6

E Post 6

F Stake 6

HOW SOLAR WORKS

The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the

solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and

season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.

Assembly and Installation

NOTE: Do not use a hammer. If the ground is hard, use water to soften or a

trowel to loosen the soil.

Preparing for installation

Installing the solar light in the

ground

□ Attach the post (E) to stake (F).

□ Push the assembly rmly into the ground.

1 2

Solar LED Path Light

Use and Care Guide

Item #1001 855 995

Model #84010

□ Firmly slide the post (E) into the

housing (D).

□ FOR FIRST TIME USE: Twist and remove

the housing (D) from the top cover (A).

Remove the pull tab between the top

cover (A) and housing (D).

□ Replace the top cover (A) on the

housing (D).

Summary of content (4 pages)

PAGE 1
Use and Care Guide Solar LED Path Light Item #1001 855 995 Model #84010 PACKAGE CONTENTS A B C D PLANNING FOR A SUCCESSFUL ASSEMBLY E F Part Description Quantity Read all instructions before assembly and installation. A Top Cover 6 Inspect each part for defects that may have occurred during shipping. B 6 Keep your receipt and these instructions for proof of purchase.
PAGE 2
Maintenance Replacing the battery A CAUTION: When replacing the battery, use one (1) 450 mAh LiFePO4, 14430, 3.2V rechargeable battery. D IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. NOTE: For best performance, replace with a rechargable 3.2V LiFePO4 battery of 450 mAh or greater every 3 years or when performance diminishes. □□ □□ □□ CA Twist and remove the housing (D) from the top cover (A). Remove the battery cover (C).
PAGE 3
Guía de uso y mantenimiento Lámpara LED solar para senderos Artículo núm.: 1001 855 995 Modelo núm. 84010 CONTENIDO DEL PAQUETE A B C D CÓMO PLANIFICAR UN ENSAMBLAJE EXITOSO E F Pieza Descripción Cantidad A Cubierta superior 6 Lee todas las instrucciones antes de ensamblar e instalar. Verifica que ninguna de las piezas haya sufrido daños durante el envío. Conserva el recibo y estas instrucciones como comprobante de compra.
PAGE 4
Mantenimiento Cómo reemplazar la batería A PRECAUCIÓN: Al reemplazar la batería, usa una (1) batería recargable de Fosfato de Litio 14430, de 450 mAh y 3.2 V. D IMPORTANTE: Desecha las baterías conforme con las regulaciones locales, estatales y federales. NOTA: Para un mejor funcionamiento, reemplaza con baterías recargables de fosfato de litio de 3.2 V cada 3 años o cuando el rendimiento disminuya. □□ □□ □□ CA Gira y quita la carcasa (D) de la cubierta superior (A).