Installation Guide

1
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
PACKAGE CONTENTS
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shad-
ed areas as these areas will not allow the batteries to fully charge and reduce
the nighttime operating hours for your light. Ensure that the installation location
is away from other nighttime light sources such as street or porch lamps. These
light sources may prevent your solar light from automatically turning on.
Part Description Quantity
A LED Rope 1
B Mounting ties 16
C Screws 16
D Solar Panel 1
E Battery Cover 1
F Waterproof Cover 1
G
3.2V 1000mAh LiFePO4 (Model 18500)
rechargeable battery
1
H Post 1
I Stake 1
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries.
At night, the solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location,
daily weather conditions, and season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
NOTE: Do not use a hammer. If the ground is
hard, use water to soften or a trowel to loosen
the soil.
NOTE: DO NOT PUNCTURE OR CUT THE ROPE
LIGHT.
Attaching and installing the
solar panel and stake
Installing the mounting
ties to the LED rope.
Insert the post (H) into the bottom of the solar
panel (D).
solar panel post (H).
Push the assembly into the ground.
Use the mounting ties (B) to tie the LED rope (A).
Mount the ties (B) on the surface you want with
screws (C).
Cut off excess ends of the mounting tie.
1 2
Solar LED Rope Light
Use and Care Guide
Item #1002 643 989
Model #84130
Connecting the LED rope to
the solar panel.
Connect the LED rope light (A) to the
solar panel (D).
3
A
B
C
D
E
F
G
H
I
A
B
C
D
H
I
D
A
A
B
C

Summary of content (4 pages)