Instructions / Assembly

ManualsBrandsHampton Bay ManualsLandscape Flood Lights & SpotlightsSolar Powered Black Outdoor Integrated LED 3000K Warm White landscape Spot Light Kit with Remote Panel (3-Pack)

HOMEDEPOT.COM

Please contact 1-855-HD-HAMPTON for further assistance.

A B C D E

PACKAGE CONTENTS

PLANNING FOR A SUCCESSFUL ASSEMBLY

Read all instructions before assembly and installation.

Inspect each part for defects that may have occurred during shipping.

Keep your receipt and these instructions for proof of purchase.

CHOOSING THE RIGHT LOCATION

Install your solar light in a location with full, direct sunlight. Do not install in shad-

ed areas as these areas will not allow the batteries to fully charge and reduce

the nighttime operating hours for your light. Ensure that the installation location

is away from other nighttime light sources such as street or porch lamps. These

light sources may prevent your solar light from automatically turning on.

Part Description Quantity

A Spotlight head 3

B Fixers 3

C Screws 6

D Spotlight stake 3

E Solar panel 1

F Battery cover 1

G Waterproof cover 1

800mAh LiFePO4, 18500 3.2V

rechargeable battery (pre-installed)

I Post for solar panel 1

J Solar panel stake 1

HOW SOLAR WORKS

The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries.

At night, the solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location,

daily weather conditions, and season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.

Assembly and Installation

NOTE: Do not use a hammer. If the ground is

hard, use water to soften or a trowel to loosen

the soil.

NOTE: Do not use a hammer. If the ground is

hard, use water to soften or a trowel to loosen

the soil.

NOTE: Ensure the wire at the bottom of the

spotlight head ts into the notch (AA) at the

bottom of the spotlight head post to avoid

pinching the wire.

Attaching and installing the

solar panel and stake

Installing the spotlight

into the ground (Option 1)

□ Insert the post (I) into the bottom of the

solar panel (E).

□ Insert the solar panel stake (J) rmly into

the solar panel post (I).

□ Push the assembly into the ground.

□ Attach the spotlight head (A) rmly to the

stake (D).

□ Push the spotlight assembly rmly into the

ground.

1 2

Solar LED Spotlights with Remote

Solar Panel

Use and Care Guide

Item #xxx-xxx

Model #84203

NOTE: Make sure the wire at the bottom of

the spotlight head ts into the notch (AA)

at the bottom of the spotlight head post to

avoid pinching the wire.

Installing on a wooden post

(Option 2)

□ Mount the xer (B) to the post using the

screws provided (C).

□ Attach the spotlight head (A) rmly to the

xer (B).

Summary of content (4 pages)

PAGE 1
Use and Care Guide Solar LED Spotlights with Remote Solar Panel Item #xxx-xxx Model #84203 PACKAGE CONTENTS F A B C D I E G J H PLANNING FOR A SUCCESSFUL ASSEMBLY Part Description Quantity Read all instructions before assembly and installation. A Spotlight head 3 Inspect each part for defects that may have occurred during shipping.
PAGE 2
Assembly and Installation (continued) 3 4 Connecting the spotlights □□ NOTE: Each spotlight has a top wire (1) and a bottom wire (2). □□ Connecting the spotlights to the solar panel Connect the last spotlight in the series to the solar panel (E) by screwing the bottom wire (1) clockwise into the outlet plug on the underside of the solar panel (2). Connect the spotlights in a series by screwing the bottom wire (2) clockwise into the top wire (1) of the next light.
PAGE 3
Guía de Uso y Mantenimiento Foco LED Solar con Panel Solar Remoto Artículo Núm. xxx-xxx Modelo Núm. 84203 CONTENIDO DEL PAQUETE F A B C D I E J G H PLANIFICAR UN ENSAMBLADO EXITOSO Pieza Descripción Cantidad Lee todas las instrucciones antes de ensamblar e instalar. A Cabezal del foco 3 Verifica que ninguna de las partes haya sufrido daños durante el envío.
PAGE 4
Ensamblaje e Instalación (continuación) 3 4 Cómo conectar los focos □□ NOTA: Cada foco tiene un cable superior (1) y uno inferior (2). □□ Cómo conectar los focos al panel solar Conecta el último foco de la serie al panel solar (E) enroscando el cable inferior (1) hacia la derecha en el enchufe de salida en la parte inferior del panel solar (2). Conecta los focos en serie enroscando el cable inferior (2) hacia la derecha en en el cable inferior (1) de la próxima lámpara.