Item #000-000 Model #89545 USE AND CARE GUIDE 3-LIGHT CHANDELIER Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-877-527-0313 HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this fixture. We strive to continually create quality products designed to enhance your home.
Table of Contents Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . .
Pre-Installation Please read and understand this entire manual before attempting to assemble, operate, or install the product. NOTE: Before beginning assembly of this product, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble the product. TOOLS REQUIRED Claw hammer Safety goggles Phillips screwdriver Wire strippers Electrical tape Ladder Pliers HARDWARE INCLUDED GND NOTE: Hardware not shown to actual size .
Pre-Installation (continued) PACKAGE CONTENTS A C D E F G O H L P J B K N I Part Description M Quantity Part 1 I J Finial Glass Shade 1 K L M N O P Coupling Arm Decorative Cap Threaded Pipe Thumb Screw Fixture Body 1 3 1 A B Canopy Threaded Socket C D E F G H Screw Collar Ring Screw Collar Loop Chain Fixture Loop 1 1 1 Threaded Post Threaded Socket Ring 1 3 3 1 4 Description Quantity 3 1 3 1
Installation 1 Installing the mounting bracket Orient the mounting bracket (DD) so that the raised center portion protrudes into the outlet box. Connect the mounting bracket (DD) to the outlet box with machine screws (BB). Screw the threaded nipple (EE) into the screw collar loop (D) a minimum of 1/4 in. Lock it in place with a hex nut (CC). Thread another hex nut (CC) to the center of the threaded nipple (EE), and screw the threaded nipple (EE) into the mounting bracket (DD).
Installation 3 Making the electrical connections BARE COPPER, OR GREEN GROUND FIXTURE WIRE BARE COPPER, OR GREEN GROUND SUPPLY WIRE DANGER: Hazardous voltages cause severe injury or death. Disconnect all sources of power before servicing. Make the wiring connections using the wire connectors (AA) according to the diagram. Wrap the ground wire from the outlet box around the ground screw on the mounting bracket (DD) no less than 2 in. from the end of the wire.
Installation 5 Securing the arms O Pass the thumb screws (O) through the arms (L) and into the fixture body (P). L P NOTE: Be sure the fixture arms are spaced evenly before securing. 6 Assembling the decorative cap Screw the threaded pipe (N) into the coupling (K). Pass the decorative cap (M) over the threaded pipe (N) and secrue in place using the finial (I). K N I 7 M HAMPTONBAY.COM Please contact 1-877-527-0313 for further assistance.
Installation 7 Hanging the fixture Attach the chain (E) to the screw collar loop (D). Raise the fixture up, and attach the chain (E) to the fixture loop (F). D E F 8 Installing the bulbs and shades H Lower the glass shade (J) over the threaded socket (B). Screw the threaded socket ring (H) onto the threaded socket (B). Repeat this process for the remaining fixture arms (L). Install three 100W max., medium base bulbs (not included) into the socket assemblies (B).
Care and Cleaning When replacing bulbs, use 100W max., medium base bulbs. Always be certain that the electric current is turned off before cleaning this item. Use a soft, moist cloth with mild, non-abrasive soap to clean the fixture. Never use glass cleaner on the fixture, as it will damage the metal finish. All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. Troubleshooting Problem Solution The fixture does not light.
Service Parts GND Chandelier AA BB C D J Part Description DD CC F E M EE H A I O Part # Part Description Part # AA BB Wire Connector Short Machine Screw WC001 SCR832X050 E F Chain Fixture Loop CHAIN-OZ FL89545 CC DD EE A Hex Nut Mounting Bracket Threaded Nipple Canopy NUT832 XBAR01 TN18200 C89545 H I J M Threaded Socket Ring Finial Glass Shade Decorative Cap LR009 F89545 GS89545 DC89545 C D Screw Collar Ring Screw Collar Loop SCG-OZ SCL-OZ O Thumb Screw TS89565 10
Questions, problems, missing parts? Before returning to the store, call Hampton Bay customer service 8 a.m.-6 p.m., EST Monday-Friday 1-877-527-0313 HAMPTONBAY.COM Retain this manual for future use.