Installation Guide

6
Installation
Screw the xture loop (F) onto the threaded post
(G).
Attaching the xture loop
4
Making the electrical connections
Wrap the ground wire from the outlet box around
the ground screw on the mounting bracket (DD)
no less than 2 in. from the end of the wire.
If the xture is supplied with a ground wire,
connect it to the outlet ground wire with a wire
connector (AA).
Make the wiring connections using the wire
connectors (AA) according to the diagram.
3
DANGER: Hazardous voltages cause severe injury or death.
Disconnect all sources of power before servicing.
BARE COPPER, OR
GREEN GROUND
SUPPLY WIRE
BARE COPPER, OR
GREEN GROUND
FIXTURE WIRE
BLACK FIXTURE
WIRE
OR
WHITE FIXTURE
WIRE
BLACK SUPPLY
WIRE
BLACK SUPPLY
WIRE
PARALLEL FIXTURE CORD
(ROUND AND SMOOTH)
PARALLEL FIXTURE CORD
(“D” SHAPED AND RIDGED)
WHITE SUPPLY
WIRE
WHITE SUPPLY
WIRE
NOTE: For installation in Canada, if the
xture is supplied with a ground wire, wrap it
around the ground screw on the mounting
bracket (DD), and tighten the ground screw.
NOTE: When parallel wire (SPT I & SPT II)
is used, the neutral wire is square
shaped and ridged and the hot wire will
be round in shape and smooth.
G
F