Instructions / Assembly

4. OPERATION BUTTONS ON THE PANEL OF THE TRANSMITTER (Fig. 7):
HI key – for fan high speed.
MED key – for fan medium speed.
LOW key – for fan low speed.
FAN OFF key – for fan speed off.
OFF-ON Slide Button-This button turns the power Off and On to the Fan and Light(s).
LIGHT key – for fans that use incandescent bulbs, select “D” in the frequency switches, this “LIGHT“ button will control the light
brightness. Hold the “LIGHT“ key down to increase or decrease the light. Tap the “LIGHT“ key quickly to turn the light off or on. If you
press the button in excess of 0.7 seconds it becomes a dimmer. The light varies cyclically in 0.8 seconds. The light key has auto resume. So
it will stay at the same brightness as the last time it was turned off. For fans that use Fluorescent or LED bulbs, select “ON” in the frequency
switches, this “LIGHT“ button will control the light ON/OFF only. (Fig. 8)
YOUR REMOTE NOW HAS FULL CONTROL OF THE FAN AND LIGHT.
5. TROUBLE SHOOTING
1. Fails to operate:
a. Power to receiver?
b. Receiver wired correctly?
c. Fan manual speed control in highest position?
d. Light kit switch turned on?
e. Code set at exact same positions in both transmitter and receiver?
2. Won’t operate at distance
If transmitter operates fan/light kit when up close, but not at 20 feet away, try placing the black antenna wire higher; up through
ceiling/outside the junction box.
NOTICE!
Your ceiling fan and light kit assembly must meet the following requirements:
1. Do not use with solid state fans.
2. Electrical rating: 120V 60Hz 3.5A
MAX. motor amps:1.0
MAX. light watts:300
Fig. 7 Fig. 8
Distributed by Home Depot U.S.A., Inc.
2455 Paces Ferry Rd. N.W.
Atlanta, Georgia 30339
TOLL FREE 1-877-902-5588
HI
MED
LOW
FAN OFF
ON ECE
1 2 3 4
ON
D
LIGHT
ON ECE
1 2 3 4
ON
D
23AE 12V
OFF
ON