Use and Care Manual

5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installing the light kit for fans
without pull chains
Installing the shatter resistant
bowl for fans with pull chains
□ Place the shatter resistant shade (B) into the light kit
assembly (A), aligning the three at areas on the top ange
of the shatter resistant shade (B) with the three raised
dimples in the light kit assembly (A). Turn the shatter
resistant shade (B) clockwise until it stops.
□ Attach the pull chain extensions (AA) to the light switch
chain.
□ Pass the fan switch chain through the hole of the pull chain
guide (FF).
□ Place the shatter resistant shade (B) into the light kit
assembly (A), aligning the three at areas on the top ange
of the shatter resistant shade (B) with the three raised
dimples in the light kit assembly (A). Turn the shatter
resistant shade (B) clockwise until it stops.
□ Attach the pull chain extensions (AA) to the light switch
chain and the fan switch chain.
5
4
AA
B
E
D
A
FF
Installation (continued)
A
B
E
D