Specification

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installing the light bulbs and glass

bowl for fans without pull chains

Installing the light bulbs and glass

bowl for fans with pull chains

□ With the power off, install the two LED bulbs (Max. 9.5 watts

included) (C) by screwing them into the light bulb sockets.

□ Position the glass bowl (B) over the threaded nipple and

raise it up to the bowl cap (JJ).

□ Direct the light pull chain through the hole in the bottom

cover (BB) and the nial (CC). Place both on the threaded

nipple and tighten the nial securely.

□ With the power off, install the two LED bulbs (Max. 9.5 watts

included) (C) by screwing them into the light bulb sockets.

□ Pass the fan switch chain through the hole in the bowl cap

(JJ) of the light kit assembly (A). Position the glass bowl (B)

over the threaded nipple and raise it up to the bowl cap (JJ).

□ Install the bottom cover (AA) over the threaded nipple, and

direct the fan switch chain through the side hole of the

bottom cover (AA).

□ Install the nial over the threaded nipple and direct the light

pull chain through the hole of the nial and tighten the nial

securely.

□ Attach the pull chain extensions (DD) provided to the light

pull chain and fan pull chain.

Installation (continued)