Instructions / Assembly

5 HAMPTONBAY.com
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation (continued)
INSTALLATION OPTIONS
There are three different types of installations described below. Please read each one carefully to determine the
best method for installing your light kit:
Key Hole
Installation
The key hole refers to slots in the light kit adapter in
which screws mounted to the bottom of the switch
housing are inserted into these holes. The adapter is
then turned, locking the screws, and the screws are
tightened. Refer to the Key Hole Installation section.
Key Hole
Slot
Screw
Universal
Installation -
Center Nipple
Attachment
The universal installation usually works on all fans.
This method uses the switch housing cap on the fan
and an outer threaded tube on the light kit to connect
them. Refer to the Universal Installation section.
Threaded
Tube
Integral
Installation
The mounting of the light kit must be from the side
and not the bottom. Also, the holes in the fan’s switch
housing must line up with the holes in the light kit.
Refer to the Integral Installation section.
Screw
2.5"
Remark: Keyhole space is 2.5 inch.
3.5"
Remark: Ceiling fan switch housing is 3.5 inch.