Instructions / Assembly

ManualsBrandsHampton Bay ManualsLandscape LightingBronze 2-Tier LED Solar Path Light (2-Pack)

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

B C D E F G

PACKAGE CONTENTS

Assembly and Installation

NOTE: Do not use a hammer. If the ground is hard, use water to soften or a

trowel to loosen the soil.

Preparing for installation

Install the solar path lights into the ground

□ Remove the rubber cover (4) on the female light connector (3), insert the

male plug (2) from the other light into the connector (3), then twist the

ribbed connector nut (5) clockwise until it is tight.

□ Repeat the previous step to connect the other male plug (2) to the

underside of the solar panel head (D).

□ Insert the assemblies rmly into the ground.

1 2

Solar Path Light

Use and Care Guide

Item #xxxx xxx xxx

Model #29402

□ Connect the post (B) to the light head (A) by twisting clockwise until

it is tight, then insert the stake (C) into the bottom of the post (B).

Repeat for both lights.

□ Firmly slide the solar panel post (E) to the solar panel head (D), then

attach the solar panel stake (F) to the assembly.

□ FOR FIRST TIME USE: Open the battery cover (6) of the solar panel

head (D) to remove the pull tab (1) (rst time use only).This will allow

the battery to make a connection and become active.

PLANNING FOR A SUCCESSFUL ASSEMBLY

Read all instructions before assembly and installation.

Inspect each part for defects that may have occurred during shipping.

Keep your receipt and these instructions for proof of purchase.

CHOOSING THE RIGHT LOCATION

Install your solar panel in a location with full, direct sunlight. Do not install in

shaded areas as these areas will not allow the battery to fully charge and will

reduce the nighttime operating hours for your lights. Ensure that the installation

location is away from other nighttime light sources such as street or porch lamps.

These light sources may prevent your solar lights from automatically turning on.

Part Description Quantity

A Light head 2

B Post 2

C Stake 2

D Solar panel head 1

E Solar panel post 1

F Solar panel stake 1

G 600 mAh LiFePO4, 18500 rechargeable

battery (pre-installed)

HOW SOLAR WORKS

The solar panel converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable battery. At night, the solar lights are powered

by the battery using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and season. For optimal

performance during the evening, allow the battery to charge for 6 to 7 hours in direct sunlight.

Summary of content (4 pages)

PAGE 1
Use and Care Guide Solar Path Light Item #xxxx xxx xxx Model #29402 PACKAGE CONTENTS A B C D PLANNING FOR A SUCCESSFUL ASSEMBLY E F G Part Description Quantity Read all instructions before assembly and installation. A Light head 2 Inspect each part for defects that may have occurred during shipping. B Post 2 C Stake 2 D Solar panel head 1 Keep your receipt and these instructions for proof of purchase.
PAGE 2
Maintenance Replacing the battery 6 CAUTION: When replacing the battery, use one (1) 600mAh LiFePO4, 18500, 3.2V rechargeable battery. G IMPORTANT: Dispose of the battery in accordance with local, state, and federal regulations. D NOTE: For best performance, replace with a rechargeable 3.2V LiFePO4 battery of 600 mAh or greater every 3 years or when performance diminishes. □□ □□ □□ G Open the battery cover (6) on the solar panel head (D).
PAGE 3
Guía de uso y mantenimiento Lámpara solar para sendero Artículo núm. xxxx xxx xxx Modelo #29402 CONTENIDO DEL PAQUETE A B C D CÓMO PLANIFICAR UN ENSAMBLAJE EXITOSO E F G Pieza Descripción Cantidad Lee todas las instrucciones antes de ensamblar e instalar. A Cabezal de luz 2 Verifica que ninguna de las piezas haya sufrido daños durante el envío. B Poste 2 C Estaca 2 D Cabezal del panel solar 1 Conserva el recibo y estas instrucciones como comprobante de compra.
PAGE 4
Mantenimiento Cómo reemplazar la batería 6 PRECAUCIÓN: Al reemplazar la batería, usa una (1) batería recargable de fosfato de litio 18500, de 600 mAh y 3.2 V. G IMPORTANTE: Desecha la batería conforme con las regulaciones locales, estatales y federales. D NOTA: Para un mejor funcionamiento, reemplaza con una batería recargable de fosfato de litio de 600nAh y 3.2 V cada 3 años o cuando el rendimiento disminuya. □□ □□ □□ G Abre la cubierta de la batería (6) del cabezal del panel solar (D).