Instructions / Assembly

ManualsBrandsHampton Bay ManualsLandscape LightingMatte Black Solar Path Light (4-Pack)

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

C D

PACKAGE CONTENTS

PLANNING FOR A SUCCESSFUL ASSEMBLY

Read all instructions before assembly and installation.

Inspect each part for defects that may have occurred during shipping.

Keep your receipt and these instructions for proof of purchase.

CHOOSING THE RIGHT LOCATION

Install your solar light in a location with full, direct sunlight. Do not install in shad-

ed areas as these areas will not allow the batteries to fully charge and will reduce

the nighttime operating hours for your light. Ensure that the installation location

is away from other nighttime light sources such as street or porch lamps. These

light sources may prevent your solar light from automatically turning on.

Part Description Quantity

A Top cover 4

B 600 mAh Ni-Mh, rechargable battery

(pre-installed)

C Battery Cover 4

D Lens 4

E Housing 4

F Finial 4

G Shepherd’s Hook 4

H Post 8

I Stake 4

HOW SOLAR WORKS

The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the

solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and

season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.

Assembly and Installation

NOTE: Do not use a hammer. If the ground is hard, use water to soften or a

trowel to loosen the soil.

Prepairing for installation Installing the solar path light in the ground

□ Attach shepherd’s hook (G) to the post (H) by inserting the bottom

of the hook (G) into the top of the post (H) and turn it clockwise until

tight.

□ Attach a second post (H) to the bottom of the assembly and turn it

clockwise until tight.

□ Attach the shepherd’s hook (G) and posts (H) to stake (I). Push the

assembly rmly into the ground. Hang up the hoop of the housing (E)

on the hook (G).

1 2

Solar LED Path Light

Use and Care Guide

Item #xxx-xxx

Model #29603

□ FOR FIRST TIME USE: Remove the pull tab between the top cover (A)

and the housing (E).

Summary of content (4 pages)

PAGE 1
Use and Care Guide Solar LED Path Light Item #xxx-xxx Model #29603 PACKAGE CONTENTS A B C E D PLANNING FOR A SUCCESSFUL ASSEMBLY F H G I Part Description Quantity Read all instructions before assembly and installation. A Top cover 4 Inspect each part for defects that may have occurred during shipping. B 4 Keep your receipt and these instructions for proof of purchase.
PAGE 2
Maintenance Replacing the battery CAUTION: When replacing the battery, use one (1) 600mAh Ni-Mh, rechargeable battery. C B A IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. NOTE: For best performance, replace with a rechargable Ni-Mh battery of 600 mAh or greater every 3 years or when performance diminishes. □□ □□ □□ E Twist and remove the housing (E) from the top cover (A). Remove the battery cover (C).
PAGE 3
Guía de uso y mantenimiento Lámpara LED solar para sendero Artículo núm. xxx-xxx Modelo núm. 29603 Contenido del paquete A B C E D CÓMO PLANIFICAR UN ENSAMBLAJE EXITOSO F H G I Pieza Descripción Cantidad A Cubierta superior 4 B Batería recargable de Ni-MH de 600 mAH (preinstalada) 4 C Cubierta de la batería 4 D Lentes 4 CÓMO ELEGIR LA UBICACIÓN ADECUADA E Carcasa 4 Instala tu lámpara solar en un lugar que reciba luz solar plena y directa.
PAGE 4
Mantenimiento Cómo reemplazar la batería PRECAUCIÓN: Al reemplazar la batería, usa una (1) batería recargable de Ni-Mh de 600 mAh. C B A IMPORTANTE: Desecha las baterías según las regulaciones locales, estatales y federales. NOTA: Para un mejor funcionamiento, reemplaza con baterías recargables de Ni-Mh de 600 mAh o más cada 3 años o cuando disminuya el rendimiento. □□ □□ □□ E Gira y quita la carcasa (E) de la cubierta superior (A). Retira la cubierta de la batería (C).