Instructions / Assembly

ManualsBrandsHampton Bay ManualsCeiling FansMena 54 in. White Color Changing Integrated LED Indoor/Outdoor Matte Black Ceiling Fan with Light Kit and Remote Control

Table Of Contents

99918 54in Mena (was 51918 Mara) 11022020.pdf

Item #

1005 919 929, 1005 919 928, 1005 919 921

Model #58913, 99918, 99919

UL Model 54-INDO

USE AND CARE GUIDE

MENA 54-INCH CEILING FAN

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-855-HD-HAMPTON

HAMPTONBAY.COM

THANK YOU

We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Hampton Bay!

To view an instructional video on how to install this product:

1. Go to www.homedepot.com and enter the item or model number, found in the top

right corner of the cover of this instruction manual, in the search eld.

2. Click on your product from the list of search results, then click on the video link in the

“Product Overview” section.

Summary of content (15 pages)

PAGE 1
Item #1005 919 929, 1005 919 928, 1005 919 921 Model #58913, 99918, 99919 UL Model 54-INDO USE AND CARE GUIDE MENA 54-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM To view an instructional video on how to install this product: 1. Go to www.homedepot.
PAGE 2
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
PAGE 3
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier warrants that the light kit, excluding any glass, to be free from defects in workmanship and material at the time of shipment from the factory for a period of five years after the date of purchase by the original purchaser.
PAGE 4
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
PAGE 5
Pre-Installation (continued) PACKAGE CONTENTS A G B I C D J K E L F Part Description Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly 1 C Canopy 1 D Decorative motor collar cover 1 E Fan-motor assembly 1 F Blade 5 Part Description Quantity G Light kit assembly 1 I Receiver 1 J Remote control 1 K Extension lead wire 1 L Battery 1 IMPORTANT: This product and/or components are governed by one or more of the following U.S.
PAGE 6
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
PAGE 7
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □ Remove the canopy ring (FF) from the canopy (C) by turning the □ □ □ ring counter clockwise until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two canopy screws (II) located in the “L shaped” slots. Remove and save the two canopy screws (HH) in the round holes. This will enable you to remove the mounting bracket (A).
PAGE 8
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box □ Carefully lift the fan-motor assembly (E) up to the slide-on WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. 15.9 kg) or less”, and use screws provided with the outlet box. mounting bracket (A).
PAGE 9
Assembly - Hanging the Fan (continued) 3 4 Setting the code on the remote control and receiver Installing the receiver NOTE: The frequencies on your receiver and hand unit have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and hand unit are set to the same frequency. The dip switches on the hand unit are located inside the battery compartment. WARNING: To reduce the risk of fire or electric shock, remember to disconnect power.
PAGE 10
Assembly - Hanging the Fan (continued) 5 6 Wiring the receiver to the household wiring WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. Wiring the fan to the receiver NOTE: The fan comes with 12 in. lead wires for use with the provided 6 in. ball downrod assembly (B).
PAGE 11
Assembly - Hanging the Fan (continued) 7 II Mounting the fan-motor assembly (standard mount) A I □ Align the locking slots of the canopy (C) with the two □ □ □ B screws (II) in the mounting bracket (A). Push up to engage the slots and turn clockwise to lock in place. Firmly tighten the two mounting screws (II). Install the two canopy screws (HH) (saved from Assembly Step 1 “Prepairing for mounting”) into the holes in the canopy (C) and tighten firmly.
PAGE 12
Assembly - Attaching the Accessories 1 Attaching the light kit fitter assembly □ Connect the wires from the light kit assembly (G) to the wires □ from the fan motor assembly (E) by connecting the molded adaptor plugs together. Carefully tuck all wires and splices into the switch cup and connect the safety cable (SS) from the light kit assembly (G) to the hook from motor assembly (E).
PAGE 13
Operating Your Fan and Remote Control Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. Speed setting for warm or cool weather depends on factors such as the room size, ceiling height, number of fans and so on. A. Warm weather YY The fan is shipped from the factory with the reversing switch (YY) positioned to circulate air downward.
PAGE 14
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically to help maintain its new appearance over the years.
PAGE 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.