Installation Guide

THANK YOU
We appreciate the trust and confdence you have placed in Hampton Bay through the purchase of this [product
description]. We strive to continually create quality products designed to enhance your home. Visit us online to see our
full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Warranty
HEADING 2 – TYPE OF WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
found to be defective, and not to the entire set of which the item is a part.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-877-527-0313
HOMEDEPOT.COM
USE AND CARE GUIDE
THD PRODUCT NAME: Marywood Spring Chair
Item #000-000
Model #AC-AMC-699
Safety Information
Care and Cleaning
Pre-Installation
NO TOOLS REQUIRED
Installation
1
Checking Parts
IMPORTANT:Do not attempt assembly
if any parts are missing or damaged.
5
Tighten all bolts
Maintenance
PACKAGE CONTENTS
Part Description Part Description
A CHAIR FRAME, 1 pc. I BACK CUSHION, 1 pc.
B CHAIR BASE, 1 pc. J PILLOW, 1 pc.
C 1/4" X 15MM BOLT, 2 pcs.
D 1/4" X 55MM BOLT, 2 pcs.
E E6.5 X 1.0 MM WASHER, 4 pcs.
F BOLT COVER, 4 pcs.
G HEX BOLT DRIVER, 1 pc.
H SEAT CUSHION, 1 pc.
F
G
A
B
C
D
E
Step 1: Identify all parts packed in carton against the parts list. Remove all protective materials.
Place parts on a non-abrasive surface to avoid scratching. If you are missing any parts
or are unsure as how to proceed with the assembly, call our Customer Service Center at
1-800-206-8095. Do not attempt assembly if any parts are missing or damaged.
Step 3: Working from the underside of the front of the chair, insert a bolt a washer through the
chair frame and into the fixed nut holes in the chair base (as shown in Figure 2). Hand tighten
3-4 revolutions only. DO NOT TIGHTEN COMPLETELY. Repeat for opposite side.
Step 2: Working from behind the chair, have another person stand in front of the chair and
position the chair frame in between the arms of the chair base (as shown in Figure 1) so
that holes on both sides of the upper portion of the chair frame back align with the fixed
the nut holes in the chair base.
Step 4: From behind the chair, insert a bolt and a washer through the hole on one side of back
portion of the chair frame and into the fixed nut hole in the back arm portion of the
chair base(as shown in Figure 3). Make sure the bolt is inserted exactly straight! Hand
only. DO NOT TIGHTEN COMPLETELY. Repeat for opposite tighten 3-4 revolution
Step 5: Tighten all bolts.
DO NOT OVER TIGHTEN BOLTS.
Over tightening may strip bolts or nuts, damaging the entire chair.
Step 6: Examine the chair from the front. If the chair frame does not appear straight in the
chair base, repeat steps 3, 4 and 5.
side of chair.
CHAIR FRAME
(CROSS SECTION)
CHAIR BASE
(CROSS SECTION)
A
B
D
E
F
C
E
F
Figure 2
Figure 3
H
I
2
Put the chair frame together with the base
J
Installation
3
Assembly the seat with the armrest
Figure 1
Installation
Assembly the back with the armrest
4
Examine
6
· Frames. Frame construction is warranted against defects in material and workmanship for five years
water and/or sub-freezing temperatures is not covered.
· Finishes. Paint finishes are warranted against peeling, cracking and blistering for one year from
normal wear and tear are not covered.
· Fabrics. Fabric and cushions (if applicable) are warranted against separation at the seams for one
year from purchase date. Fading and/or discoloration resulting from exposure to the elements, oils,
from purchase date. Damage to frames or welds resulting from improper assembly or exposure to
purchase date provided the unit has not been scratched or abraded. Chips and scratches resulting from
spills, fluids, chemicals, or any other cause is not covered.
Warranty limitations: This warranty is subject to the limitations set forth above. In addition, this
one of our authorized dealers. This warranty is not transferable. For warranty replacements based on
warranty claims submitted within the first year of purchase, we will pay shipping and handling charges
within the continental North America. After the first year, shipping and handling charges are your
responsibility. We will not be responsible for charges associated with shipments outside the continental
warranty is made to the original purchaser only, and is effective only when item(s) is purchased from
North America at any time or for any reason.
Warranty exclusions: This warranty is subject to the exclusions as set forth above. In addition, the
following are excluded from coverage under this warranty: any item used for commercial, contract or
any other non-residential purpose; clearance items, display models or items purchased "as is"; freight
damage; items subject to misuse, abuse, neglect or lack of proper care and maintenance (including
without limitation as provided in any "care and maintenance guide"); normal wear and tear; damage
caused by acts of nature, acts of force majeure, vandalism, fire or other casualty, or improper assembly;
hardware against corrosion or rusting; purchased or replacement parts; and all plastic parts. Also
excluded are loss of use or time; inconvenience; money; travel; packaging; or incidental, special or
statement of your rights with respect to the defects in the items you have purchased and supersedes any
other express warranty or statement, written or oral, made in connection with the purchase and sale of
such items. When used herein, the term "item" when used in the singular, refers to the specific item
Some states do not allow exclusion or limitation of incidental or consequential damages, so that
limitation above may not apply to you. This warranty gives you specific legal rights, and you
consequential damages of any kind. Replacement of defective items as provided herein shall constitute
your sole and exclusive remedy for items which are not as warranted. In no event shall our responsibility
exceed the purchase price of the items found to be other than as warranted. This warranty the exclusive
may also have other rights which vary from state to state.
IMPORTANT NOTE: Assembling this chair requires attaching the chair frame to the chair
base. We recommend two people work together to assemble the chair since it is critical that
all the holes in the chair frame are aligned exactly with the holes in the chair base. All bolts
need to be inserted and tightened into the fixed nuts in a straight and direct path. Inserting
the bolts at even the slightest angle could strip the nuts and bolts, damaging the entire chair.
FRAMES
Cleaning - Use mild soap and warm water. Do not use abrasive materials, cleansers or bleach products.
Rinse with clean water and dry thoroughly.
Maintenance - Periodically clean and dry thoroughly. Be sure to drain any water accumulated inside the frames.
To thoroughly drain frames, remove foot caps and tilt the frames, if necessary, to remove all water. This is
critical. Water allowed to accumulate inside the frames and then exposed to sub-freezing temperatures can cause
damage to the frame tubing. Such damage is not covered under warranty. Always clean, drain and dry thoroughly
before storing for the winter. For best results, always store or cover your furniture when not in use. We
recommend commercially available outdoor furniture covers. Any small nicks or scratches can be covered with
** When cleaning or moving large or heavy items, always have two people work together. Never drag furniture.
a light application of touch-up paint.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
or call the customer service center at 1-800-206-8095 between 8:00AM and 8:00PM (eastern time)
Monday through Friday (closed holidays).
IMPORTANT NOTE: Damage to welds or frames resulting from over tightened bolts or
improper assembly is not covered under our warranty. Please read all instructions
carefully before assembly.