Instructions / Assembly

THANK YOU
We appreciate the trust and confdence you have placed in Hampton Bay through the purchase of this [product
description]. We strive to continually create quality products designed to enhance your home. Visit us online to see our
full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Warranty
HEADING 2 – TYPE OF WARRANTY
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-877-527-0313
HOMEDEPOT.COM
USE AND CARE GUIDE
THD PRODUCT NAME: Marywood Firepit Table
Item #000-000
Model #A-FT-699-R01
Safety Information
Installation
1
Maintenance
PACKAGE CONTENTS
Part Description
A TABLE TOP, 1 pc.
B TABLE LEG, 4 pcs.
C FIRE BOWL, 1 pcs.
D
E
STEEL GRATE, 1 pcs.
F
MESH COVER, 1 pcs.
G COVER, 1 pc.
H
LEG CONNECTOR BRACKET, 1 pc.
F
G
A
B
C
D
E
H
Installation
3
Assembly leg connerctor with table leg
FIRE PIT POKER, 1 pcs.
I
L
K
I
L
K
L
J
K
Step 3: After making any necessary adjustments to the
(B) and the leg connector
bracket(H), use the hex bolt driver (M) to tighten
the bolts. Note: each bolt must be tightened a few
In order to apply equal pressure
to all bolt joints, we recommend working
in a cross corner (X fashion). Repeat until all bolts are tight. Do not over
tighten. Over tightening may strip bolts. After tightening all the bolt Cover
all the bolt and boltls with bolt covers (L).
Step 1: Remove all protective materials and set parts on a flat, non-abrasive
surface. Identify parts packed in carton against the parts list.
Step 2: Place the fire pit top upside down on a flat, non-abrasive surface.
Attach
legs(B) to
top (A)using bolts(I) and fire pit fire pit washers
as shown in Figure 1. Guide bolt through (K) hole in fire pit top
corner bracket and into pre-drilled holes in fire pitleg.
some adjustments may be necessary to ensure proper alignment of the
table leg. Repeat above procedure for remaining fire pit legs.
Hand tighten three to four turns only. Do not tighten completely.
Step 3:
Repeat on other three legs. Do not tighten completely.
and
(J)
washes(K)as shown in Figure 2.Do not tighten
Repeat on other three legs.
pit leg(B)using bolts
Step 5: With the help of another person, turn the fire pit in the upright position. Careful place the
fire bowl(C)
inside the center of the fire pit rim as shown in Figure 3. Place grate (D)
inside the fire boml (C) , the mesh cover (E) on the base. For storage or use as a table, put
the cover (G) on the top.
E
C
D
G
F
Never put cover (G)
when there is still fires
I
J
K
L
M
N
Part Description
I
J
K
1/4" X 15MM BOLT, 4 pcs.
L
M
E6.5 X 1.0 MM WASHER, 12 pcs.
N
HEX BOLT DRIVER, 1 pcs.
TOUCH-UPAINTP, 1 pc.
1/4" X 30MM BOLT, 8 pcs.
PVC NUT COVER, 12 pcs.
2
Assembly legs with table top
Attach leg connector (H) to the fire
completely.
Tighten all bolts
4
alignment of the table legs
all
revolutions at a time.
Installation
5
Ready for use as a firepit or a table
Paint finishes for 30-days against defects in materials or workmanship only provided the item has not been
scratched or abraded. Scratches resulting from normal wear and tear are not covered.
Fire bowl and mesh cover and grate for 30-days against defects in materials or workmanship only. General
rusting is not covered.
Fire pit
Fire pit top
top and cover for 30-days against defects in materials or workmanship only.
and center panel breakage is not covered. Please take precautions to protect the fire pit top surface.
This warranty excludes the following: fire pit used for any purpose other than private residential use;
furniture damaged by acts of nature, abuse, lack of proper care and maintenance, or improper assembly;
fire pit tops materials against breakage; hardware against rust or corrosion; loss of use, inconvenience
or any other incidental damages. In no event shall our responsibility exceed the value of the replacement
product. Warranty is to the original purchaser only and is not transferable. Copy of dated register receipt
required for all warranty claims. For quality control purposes, we reserve the right to request images of
the damaged items. In the event of discontinued items, we reserve the right to substitute with an item of
Frames. frame construction is warranted against defects in material and workmanship for one year from
purchase date. Damage to frames or welds resulting from improper assembly or exposure to water and/or
sub-freexing temperatures is not covered.
IMPORTANT NOTE: Damage to welds or frames resulting from over tightened bolts or improper
assembly is not covered under ourwarranty. Please read all instructions carefully before assembly.
Care and Cleaning
Pre-Installation
NO TOOLS REQUIRED
FRAMES
Cleaning - Use mild soap and warm water. Do not use abrasive materials, cleansers or bleach products.
Rinse with clean water and dry thoroughly.
Maintenance - Periodically clean and dry thoroughly. Be sure to drain any water accumulated inside the frames.
To thoroughly drain frames, remove foot caps and tilt the frames, if necessary, to remove all water. This is
critical. Water allowed to accumulate inside the frames and then exposed to sub-freezing temperatures can cause
damage to the frame tubing. Such damage is not covered under warranty. Always clean, drain and dry thoroughly
before storing for the winter. For best results, always store or cover your furniture when not in use. We
recommend commercially available outdoor furniture covers. Any small nicks or scratches can be covered with
** When cleaning or moving large or heavy items, always have two people work together. Never drag furniture.
a light application of touch-up paint.
our choice of similar style and quality.
or call the customer service center at 1-800-206-8095 between 8:00AM and 8:00PM (eastern time)
Monday through Friday (closed holidays).
WHAT IS NOT COVERED
found to be defective, and not to the entire set of which the item is a part.
Warranty exclusions: This warranty is subject to the exclusions as set forth above. In addition, the
following are excluded from coverage under this warranty: any item used for commercial, contract or
any other non-residential purpose; clearance items, display models or items purchased "as is"; freight
damage; items subject to misuse, abuse, neglect or lack of proper care and maintenance (including
without limitation as provided in any "care and maintenance guide"); normal wear and tear; damage
caused by acts of nature, acts of force majeure, vandalism, fire or other casualty, or improper assembly;
hardware against corrosion or rusting; purchased or replacement parts; and all plastic parts. Also
excluded are loss of use or time; inconvenience; money; travel; packaging; or incidental, special or
statement of your rights with respect to the defects in the items you have purchased and supersedes any
other express warranty or statement, written or oral, made in connection with the purchase and sale of
such items. When used herein, the term "item" when used in the singular, refers to the specific item
Some states do not allow exclusion or limitation of incidental or consequential damages, so that
limitation above may not apply to you. This warranty gives you specific legal rights, and you
consequential damages of any kind. Replacement of defective items as provided herein shall constitute
your sole and exclusive remedy for items which are not as warranted. In no event shall our responsibility
exceed the purchase price of the items found to be other than as warranted. This warranty the exclusive
may also have other rights which vary from state to state.
1
Checking Parts
IMPORTANT:Do not attempt assembly
if any parts are missing or damaged.
onto the table top (A)
inside of the fier bowl (C)!
The firepit is now ready for use.