Use and Care Manual

PRIOR TO INSTALLATION:

Keep product in its packaging and away from

humidity or direct heat until you are ready to

install it.

The wood may bow slightly upward at the

edges if it is stored for a long period of time. To

return the surface to its original condition, turn

it over and lay it on its face until it’s reformed to

its original shape.

Check the color and ﬁnish of your surface before

installation. You cannot return or exchange the

product once it has been altered or installed.

Keep in mind that wood is a natural material, so

each surface can vary slightly in color, tone, and

characteristics. This adds to its beauty.

Seal your surface immediately after opening the

package to prevent moisture damage.

Seal all raw surfaces or bare edges prior to use.

DURING INSTALLATION:

Reseal any areas that have been cut with at

least four coats of sealer.

Always use protective equipment when cutting

and installing the wood countertops.

FOR DAILY USE:

Wash the countertop immediately after each

use with a mild dish soap and water taking care

to thoroughly dry the surface.

Do not use harsh or abrasive cleansers or chem-

icals to clean the countertop. .

Do not place hot items directly on the surface.

Avoid cutting directly on the wood, as

this could damage the surface.

The following care and maintenance instructions will help extend the life and

performance of your CenterPointe butcher block countertop.

Caring for your new CenterPointe Countertops

WARNING: This product can expose you to chemicals

including respirable wood dust which is known in the State

of California to cause cancer. For more information go to:

www.P65Warnings.ca.gov/wood

Care & Maintenance

VT Customer Service

525 N. 16th Street

Sac City, IA 50583

P. 712.662.4177 - 888.287.8356

F. 712.368.4188

V T I N D U S T R I E S . C O M

*Warranty is void if the surface is not finished or treated.