Item #1005 228 113 Model #AC386LED-WB USE AND CARE GUIDE SAVONA TIFFANY 52 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Visual instruction of how to install this fan: Visit www.homedepot.com and enter either the Item or Model number to find this fan and click the link of visual instruction in the product overview section.
Table of Contents Table of Contents ......................................................... 2 Safety Information ........................................................ 3 Operation ..................................................................... 16 Remote Control Operating Instructions ..................................16 Reverse Switch Operating Instructions ..................................17 Warranty ........................................................................
Safety Information 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 3. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lbs (15.9 kg) or less.
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size unless noted otherwise in the table below. CC AA DD BB Part EE Quantity Description AA Plastic wire nut (not to scale) 3 BB Blade attachment screws with lock washer (not to scale) 16 CC 9.5 Watt LED medium base bulb (not to scale) 2 DD 1.5V AAA battery (not to scale) 2 EE Plastic wire nut (not to scale) 6 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation (continued) PACKAGE CONTENTS A B C D E F J G K H L I Part Description M Quantity Part Description Quantity A Mounting bracket (preassembled) 1 H Light kit 1 B Canopy 1 I Glass shade 1 C Canopy bottom cover (preassembled) 1 J Blade 5 D Hanger ball / downrod assembly (4 in.) 1 K Blade support plate 5 E Extra downrod (6 in.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician. NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling.
Assembly 1 2 Preparing the canopy □ Remove the canopy bottom cover (C) from the canopy (B) by turning the canopy bottom cover (C) counterclockwise. □ Remove the mounting bracket (A) from the canopy (B) by removing the non-slotted canopy mounting screw (FF) from the bottom of the canopy (B) and loosening the slotted canopy mounting screw (FF) a half turn from the screw head. Next, turn the canopy (B) counterclockwise to remove the mounting bracket (A) from the canopy (B).
Assembly (continued) 3 □ 4 Preparing the motor Assembling the fan Remove the cotter pin (KK), and clevis pin (LL), and loosen the two collar setscrews (MM) from the motor collar. WARNING: Failure to properly install the cotter pin (KK) could result in the fan loosening and possibly falling. □ Route the wires exiting from the top of the fan motor assembly (G) through the coupling cover (F) and the canopy bottom cover (C). Ensure the slot openings are on top.
Assembly — Hanging the Fan 5 6 Installing the mounting bracket to the electrical box WARNING: To reduce the risk of fire, electric shock or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box. WARNING: The tab in the ring must rest in the groove of the hanger ball / downrod assembly (D). Failure to properly seat the tab in the groove could cause damage to the wiring.
Assembly — Hanging the Fan (continued) Preparing the receiver and remote control 2 3 NOTE: The frequencies on your receiver and remote control have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and remote control are set to the same frequency. The dip switches on the remote control are located inside the battery compartment.
Assembly — Hanging the Fan (continued) 8 Making the electrical connections WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts, except for the ground wire. Ground Black White conductor CAUTION: Do not use with a wall light dimmer switch. Outlet Box Black White NOTE: The fan must be installed at a maximum distance of 20 ft.
Assembly — Hanging the Fan (continued) 9 Attaching the canopy bottom cover 10 Installing the canopy WARNING: Make sure the tab on the mounting bracket (A) properly sits in the groove in the hanger ball / downrod assembly (D) before attaching the canopy (B) to the mounting bracket (A) by turning the canopy until it drops into place. □ Make sure connections are neatly tucked into the ceiling outlet box.
Assembly — Attaching the Fan Blades 11 Attaching the fan blades WARNING: To reduce the risk of personal injury, do not bend the blades (J) while installing, balancing the blades (J), or cleaning the fan. G WARNING: Do not insert foreign objects between rotating fan blades (J). □ Insert the blade (J) through the blade slot in the fan motor assembly (G).
Assembly — Installing the Light Kit 12 Attaching the light kit to the fan motor assembly 13 CAUTION: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box. Turning power off using the fan switch is not sufficient to prevent electric shock. □ Installing the light bulbs and glass shade CAUTION: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box.
Operation REMOTE CONTROL OPERATING INSTRUCTIONS - Press and release the button to turn the fan on or off. - Press and release 1 time - turns the fan on high speed. - Press and release 2 times - turns the fan on medium speed. - Press and release 3 times - turns the fan on low speed. - Press and release 4 times - turns the fan off. - Press and release the button to turn the light on or off.
Operation (continued) REVERSE SWITCH OPERATING INSTRUCTIONS The reverse switch is located on the top of the motor housing. Slide the switch to the left for warm weather operation. Slide the switch to the right for cool weather operation. NOTE: Wait for the fan to stop before reversing the direction of the blade rotation. Warm weather - (Counterclockwise Direction) A downward air flow creates a cooling effect. This allows you to set your air conditioner on a warmer setting without affecting your comfort.
Troubleshooting WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. Refer to step 8 “Making the electrical connections” on page 12. Problem The fan will not start. The fan sounds noisy. The remote control is not working. Solution □ Check the main and branch circuit fuses or breakers. □ Check the line wire connections to the fan and switch wire connections in the switch housing.
Service Parts A AA I B C J D BB E F CC K G L DD M H EE Part A B C D E F G H I J K L M Description Mounting bracket (preassembled) Canopy Canopy bottom cover (preassembled) Hanger ball / downrod assembly (4 in.) Extra downrod (6 in.) Coupling cover Fan motor assembly Light kit Glass shade Blade Blade support plate Receiver Remote control Part Description 19 AA Plastic wire nut BB Blade attachment screws with lock washer CC 9.5 Watt LED medium base bulb DD 1.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
