Instructions / Assembly

10
Installing the Light Kit
While holding the light holder under your fan,
make the polarized plug connections:
-White to white
-Black to black
Install the light holder onto the mounting plate
with 3 screws provided. Be sure to tighten all
screws. (Fig. 17)
Install 3 x 40W (MAX.) candelabra bulbs (
provided).
Raise the glass shade up against the light
holder, place the metal plate with rubber on the
top over the light holder and turn it clockwise
until it locks up against the light holder. Do not
over tighten. (Fig. 18)
Raise the glass frame up against the light
holder and secure it by the decorative nut. (Fig.
18)
Restore power and your light kit is ready for
operation.
1.
2.
3.
4.
5.
6.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
CAUTION
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE
AT FUSE BOX. TURNING POWER OFF USING
THE FAN SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRIC SHOCK.
Figure 17
Figure 18
Screws
Wire Connection
Mounting Plate
Light Holder
Bulbs
Glass Shade
Light Holder
Decorative Nut
Metal Plate
Glass Frame