Item #1004 707 786 #1004 678 175 #1004 677 290 Model #AL420-BN #AL420-MWH #AL420-ORB USE AND CARE GUIDE LARSON 52 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Visual instruction of how to install this fan: Visit www.homedepot.
Table of Contents Safety Information ......................................................... 3 Operation ......................................................................17 Pull Chain Operating Instructions .......................................... 17 Reverse Switch Operating Instructions ..................................17 Warranty ......................................................................... 4 Care and Cleaning .......................................................
Safety Information 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 3. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lbs (15.9 kg) or less.
Warranty The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any glass), to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A B C D E F G I H J Part Description Quantity Part Description Quantity A Mounting bracket (preassembled) 1 F Fan motor assembly 1 B Canopy 1 G Blade 5 C Canopy bottom cover (preassembled) 1 H Blade arm 5 D Hanger ball/downrod assembly 1 I Light kit 1 E Coupling cover 1 J Glass shade 1 6
Installation MOUNTING OPTIONS NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 18° away from horizontal. If the canopy touches the downrod, then remove the decorative canopy bottom cover (C) and turn the canopy (B) 180° before attaching the canopy (B) to the mounting bracket (A).
Assembly 1 2 Preparing the canopy □ Remove the canopy bottom cover (C) from the canopy (B) by turning the canopy bottom cover (C) counterclockwise. □ Remove the mounting bracket (A) from the canopy (B) by removing the non-slotted canopy mounting screws (CC) from the bottom of the canopy (B) and loosening the slotted canopy mounting screws (CC) a half turn from the screw head. Next, turn the canopy (B) counterclockwise to remove the mounting bracket (A) from the canopy (B).
Assembly — Hanging the Fan 4 5 Installing the mounting bracket to the electrical box Hanging the fan to the mounting bracket WARNING: To reduce the risk of fire, electric shock or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box. □ Pass the 120 volt supply wires through the center hole in the mounting bracket (A).
Assembly — Hanging the Fan (continued) 6a Making the electrical connections WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. Hot Neutral Black White Ground conductor WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts (except for the ground wire).
Assembly — Hanging the Fan (optional) 6b Single Switch Connections □ 6c Dual Switch Connections On a single switch the fan and light can be turned on or off together. Make wire connections as follows, using the wire nuts (BB). Wall switch not included. On a dual switch the fan and light can be turned on or off separately. Make wire connections as follows, using the wire nuts (BB). Wall switch not included.
Assembly — Hanging the Fan (continued) 7 8 Installing the canopy NOTE: Adjust the canopy mounting screws (CC) as necessary until the canopy (B) and canopy bottom cover (C) are snug. WARNING: Make sure the tab on the mounting bracket (A) properly sits in the groove in the hanger ball (D) before attaching the canopy (B) to the mounting bracket (A) by turning the canopy housing until it drops into place. □ Make sure connections are neatly tucked into the ceiling outlet box.
Assembly — Attaching the Fan Blades Removing the rubber packing mounts 9 □ Attaching the blades to the blade arms 10 The fan motor assembly (F) is shipped with rubber packing mounts (QQ) to prevent movement during transportation. Remove the five rubber packing mounts (QQ) from the fan motor assembly (F) and discard prior to attaching blade arms. □ Attach the blades (G) to the blade arms (H) using the three blade attachment screws and fiber washers (AA).
Assembly — Installing the Light Kit 12 Attaching the light kit to the switch housing 13 □ WARNING: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box. Turning power off using the fan switch is not sufficient to prevent electric shock. □ Installing the light bulbs Install two 9 watt LED bulbs (NN) (included).
Assembly — Installing the Light Kit (continued) 14 Installing the glass shade □ While holding the glass shade (J), slip the pull chain (UU) from the switch housing into the outside hole in the glass shade (J). □ Feed the pull chain (VV) from the light kit stem through the eyelet in the glass shade (J). □ Place the glass shade (J) over the light kit stem. Secure the glass shade (J) with the metal nut (JJ) (rubber side on the top).
Assembly — Installing the Light Kit (continued) 15 Installing the fan without the light kit (Optional) □ Disassemble the switch housing cover (WW) from the light kit (I). You can keep the light kit for future use. □ Attach the plastic plug (MM) to the switch housing cover (WW). □ Install the switch housing cover (WW) to the switch housing with light kit mounting screws (HH) provided.
Operation PULL CHAIN OPERATING INSTRUCTIONS Install two pull chains and fobs (II) onto the pull chains located in the switch housing and light kit (I). Turn on the power and check the operation of the fan. The pull chain controls the fan speed as follows: 1 pull - High, 2 pulls - Medium, 3 pulls - Low and 4 pulls - Off. Speed settings for warm or cool weather depend on factors such as the room size, ceiling height, numbers of fans.
Care and Cleaning Do □ Do not Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
Troubleshooting (continued) Problem Solution □ Verify that all blades and blade bracket screws are secure (most fan wobble problems are caused by loose parts). Once the fan is properly installed, run the ceiling fan for 10 minutes to let the fan self-adjust. If wobble occurs after running the fan for 10 minutes, verify blade level using the following process: The fan wobbles.
Service Parts AA A B BB G GG LL MM HH CC C NN II D E H DD I EE F J FF Part JJ KK Description Part Description A Mounting bracket (preassembled) CC Canopy mounting screw (preassembled) B Canopy DD Clevis pins (preassembled) C Canopy bottom cover (preassembled) EE Cotter pin (preassembled) D Hanger ball/downrod assembly FF Collar setscrews (preassembled) E Coupling cover GG Blade arm screw and lock washer (preassembled) F Fan motor assembly HH Light kit mounting s
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
