Instructions / Assembly

9
Attaching the Fan Blades
Attach blades to blade arm using the screws
and rubber washers provided. (Fig. 17) Start a
screw into the blade arm, do not tighten.
Repeat for the remaining screws and washers.
Tighten each screw securely starting with the
center screw. Make sure the blade is straight.
Repeat steps for the remaining blades.
Fasten the blade assemblies to the motor
housing by lining up the slots of the blade arms
with the tabs on the motor housing, then
tighten the two screws and washers already
installed in the blade arms. (Figure 18)
1.
2.
3.
CAUTION
REMOVE THE 3 SCREWS FROM THE MOTOR
SUPPORT PLATE, KEEP THE 3 SCREWS FOR
FUTURE USE AND DISCARD THE MOTOR
SUPPORT PLATE. (Fig. 16)
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE ARMS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
Blade Arm
Tab
Slot
Screws
Figure 17
Blade Arm
Blade
Screws with
Rubber Washers
Figure 18
Figure 16
Screws
Motor Support
Plate